625 in, Head Diameter 1 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.-11, Minimum Thread Length 1 3/4 in, Fastener Length 1 3/4 in, Head Height 0.Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 1/2 in, Material Steel, Finish Zinc Plated, Thread Size 5/8 In.

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 10 mm, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Thread Size M12-1.75, Minimum Thread Length 50 mm, Fastener Length 90 mm, Head Height 12 mm, Head Diameter 18 mm, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable.

3, Flange Diameter Not Applicable.Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 3/16 in, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Thread Size 1/4 In.375 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.

5-0.

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Overall Length 4 in, Thread Size #10, Drive Type Phillips, Head Type Flat, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Block, Concrete, Masonry, Minimum Installation Depth 1 1/8 in, Ultimate Tension Strength (4,000 psi Concrete) 1,694 lb, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No, Package Quantity 50.

Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 3 mm, Material Stainless Steel, Material Grade/Class 316, Finish Plain, Thread Size M4-0.7, Minimum Thread Length 6 mm, Fastener Length 6 mm, Head Height 4 mm, Head Diameter 7 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable, Flange Thickness Not Applicable.

Grade 5, 1"-8 Hex Head Cap Screw, Black Oxide Steel, 5 in L, 5 PK Thread Length 2 1/4 in, Head Height 39/64 in, Head Width 1 1/2 in, Package Quantity 5.

Machine Screw, Head Type Truss, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size #6-32, Fastener Length 1 in, Head Width 0.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 0.321 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.262 in, Head Height 0.

3, Head Height Not Applicable, Maximum Head Height Not Applicable, Maximum Temperature 302 Degrees F, Minimum Head Height Not Applicable, Minimum Temperature -58 Degrees F, Package Quantity 100.Socket Set Screw, Head Type Headless, Point Type Flat, System of Measurement Inch, Thread Size #6-32, Overall Length 1 in, Drive Type Socket, Drive Size 1/16 in, Material Alloy Steel, Finish Black Oxide, Pack Size Small Pack, Decimal Equivalent 0.063 in, Dimensional Standards ASME B18.

12 in, Maximum Head Width 0.6.312 in, System of Measurement Inch, Drive Phillips, Point Type AB, For Use in Systems Thread Forming Tapping Screw Type AB, Package Quantity 100.

25 Hex Head Cap Screw, Plain Stainless Steel, 100 mm L, 25 PK Thread Length 100 mm, Head Height 5.Not Graded, M8-1.3 mm, Head Width 13 mm, Package Quantity 25.

125 in, Head Diameter 1.

Not Graded, M6-1.

059 in, Head Diameter 0.213 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.3, Flange Diameter Not Applicable.

50 Hex Head Cap Screw, Plain Stainless Steel, 90 mm L, 25 PK Thread Length 26 mm, Head Height 6.4 mm, Head Width 17 mm, Package Quantity 25.Not Graded, M10-1.

389 in, System of Measurement Inch, Head Type Flat, Dimensional Standards ASME B18.Wood Screw, Finish Zinc Plated, Material Steel, Drive Square, Screw Size #12, Fastener Length 3 in, Head Width 0.132 in, Drive Size #3, Pack Size Small, Maximum Head Width 0.

7, Minimum Thread Length 20 mm, Fastener Length 45 mm, Head Height 4 mm, Head Diameter 7 mm, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable.Socket Head Cap Screw, Head Type Standard, System of Measurement Metric, Drive Type Socket, Drive Size 3 mm, Material Steel, Material Grade/Class Class 12.

3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 0.212 in, Minimum Head Width 0.6.211 in, Drive Size #1, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.

3, Flange Diameter Not Applicable.Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 9/64 in, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Thread Size #8-36, Minimum Thread Length 7/8 in, Fastener Length 7/8 in, Head Height 0.

1 in, Drive Size #2, Threads per Inch 15, Thread Style Partially Threaded, Minimum Thread Length 63/64 in, Pack Size Small, Maximum Head Width 0.1, Package Quantity 100.084 in, System of Measurement Inch, Head Type Flat, Dimensional Standards ASME B18.

Screw Anchor, Anchor Diameter 1/2 in, Overall Length 6 in, Head Type Hex, Drive Type External Hex, Material Steel, Finish Zinc Plated, Material Grade/Class Case Hardened, Compatible Material Concrete, Drill Bit Size 1/2 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Material Thickness 3 3/4 in, Maximum Ultimate Shear Strength 9,070 lb, Maximum Ultimate Tension Strength 4,758 lb, Minimum Installation Depth 2 in, Body Length 6 in, Package Quantity 80.

Lock Nut, Finish Zinc Plated, Material Steel, Material Grade/Class Grade 2, Thread Size 5/8 In.6, System of Measurement Inch, Hex Type Jam Hex, Thread Direction Right Hand, Color Silver, Insert Material Nylon, Made in North America No, Manufacturer Location Globally Sourced, Pack Size Small Pack, REACH Compliant Yes, Removable No.16.18.

188 in to 0.388 in, Tensile Strength 60,000 psi, For Use With Grade 2 Zinc Nuts, Package Quantity 10.Carriage Bolt,Zinc,3/8-16x7 L,Pk10 0.844 in, Head Height 13/64 in, Head Type Round, Square Height 0.

Machine Screw, Head Type Pan, Material 18-8 Stainless Steel, Finish Plain, Drive Slotted, Thread Size #8-32, Fastener Length 3/4 in, Head Width 0.312 in, Head Height 0.285 in, Maximum Head Height 0.

000 in, Usable Length 4 in, Product Type Safety Pin, Wire Shape Square, Wire Type Single, Height 11/16 in, Includes Not Applicable, Material Quality Standards Not Applicable, Dimensional Standards Not Applicable.091 in, Shank Length 4 7/16 in, Pin Diameter 1/4 in, Pin Type Snap, Material Steel, Material Grade/Class Grade 1018, Finish Zinc Plated, Outside Diameter Tolerance +0.125/-0.

Grade 5, 1/2"-13 Hex Head Cap Screw, Black Oxide Steel, 2 in L, 160 PK Thread Length 1 1/4 in, Head Height 5/16 in, Head Width 3/4 in, Package Quantity 160.

5 mm, Head Width 19 mm, Package Quantity 50.8, M12-1.75 Hex Head Cap Screw, Zinc Plated Steel, 30 mm L, 50 PK Thread Length 30 mm, Head Height 7.Class 8.

Grade 5, 1-1/8"-7 Hex Head Cap Screw, Black Oxide Steel, 7 in L Thread Length 2 3/4 in, Head Height 11/16 in, Head Width 1 11/16 in.

,45 ft.

Fan Blade,20",1/2" Bore Bore, Fits Brand Liebert.