JW Winco GN 516-KG-27 Cam Latch This cam latch housing is designed for common applications such as making a tight and vibration-proof interlock in the end position (clamping position) in connection with an elastic sealing..
1-92-3/8X16 Plastic Adjustable Lever All such levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position.WN300..
In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.GN473-35-B12-ELS 2-Way Base Connector The bore spacing of the GN 473 two-way base connector mini-clamps corresponds the connector mini-clamps and flange bolts..
Toggle screw swivels up to 15° in any direction. Plastic thrust pad can be easily detached from and reassembled to screw..GN903-25-M8-20-ST Spindle Assembly The hexagon nuts are included.
GN726-34-B8-M-1 Knurled Control Knob The collet type provides a simple way of positioning and locking the control knob to the shaft.. It can be removed by inserting a screw driver into the slot provided.
.DIN950-AL-500-B34-A Spoked Handwheel Handle shipped loose; mounting of handle is required. No mounting hole in rim for handwheel without handle. In aluminum they are supplied with handles made of plastic (type D) and made of steel (type F).
JW Winco GN126-120-B10-SW Adjustable Lever They have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position..
To achieve this, the knob is rotated by 90 degrees after being retracted. GN817-6-6-1/2X13-G Indexing Plunger Type G and GK with threaded stem are for applications where a special knob or attachment is required, or for such cases where the spindle is linked directly to an operating mechanism. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism.
.GN903-32-M8-45-NI Spindle Assembly The hexagon nuts are included. Plastic thrust pad can be easily detached from and reassembled to screw. Toggle screw swivels up to 15° in any direction.
GN705-18-E-ZB Set Collar Steel Zinc The clamping is done radially on the shaft or axle surface.. Together with a dimpled hole or a groove on the shaft diameter, the shaft collars can be positioned exactly and, at the same time, damage to the clamping point can be avoided.
.GN32-100-M20-150-A1-UK Leveling Feet The threaded stud can be either adjusted via the internal hexagon at the top or the wrench flats at the lower end.
GN310-14-200-A-1/2X13-NI Gear Lever Stainless Steel Used for actuating the material flow through hydraulic valves via the lever handle or, used as control levers for on / off, start / stop applications where the lever handle is attached to set collars, split hubs, or eccentric cams, are example uses of these standard parts.
JW Winco GN125 10N80A33/D Adjustable Lever The cover disk gives these levers a nice appearance. They are ideal wherever parts have to be clamped in a confined space or in a particular lever position.
Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds.Many factors contribute to its success. The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps. Contoured Edge.