1, Uni 10290), Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends.Profile Cylinder DNC-4"-2"-P-A Stroke=2 ", Piston Diameter=4", Piston Rod Thread=3/4-16 Unf-2A, Based On The Standard=Iso 15552 (Previously Also Vdma 24652, Iso 6431, Nf E49 003.
Soft-Start Valve VABF-S6-1-P5A4-G12-4-1-P Positive Test Pulse With Logic 0=2500 µs, Max. Negative Test Pulse With Logic 1=1400 µs, Vibration Resistance=Transport Application Test At Severity Level 2 In Accordance With Fn 942017-4 And En 60068-2-6, Shock Resistance=Shock Test With Severity Level 2 In Accordance With Fn 942017-5 And En 60068-2-27, Based On The Standard=Iso 5599-2.
Mini Slide Dgsl-25-10-Ea Stroke=10 Mm, Adjustable Endposition Range/Front Length=11,5 Mm, Adjustable Endposition Range/Rear Length=5,5 Mm, Piston Diameter=32 Mm, Operating Mode Of Drive Unit=Yoke.
Pneumatic Valve Vuwg-L18-T32H-M-G14 Valve Function=2X3/2 Open/Closed, Monostable, Type Of Actuation=Pneumatic, Valve Size=18 Mm, Standard Nominal Flow Rate=1000 L/Min, Operating Pressure=-0,9 - 10 Bar.
Standards-Based Cylinder DNC-32-320-PPV Stroke=320 Mm, Piston Diameter=32 Mm, Piston Rod Thread=M10X1,25, Cushioning=Ppv: Pneumatic Cushioning Adjustable At Both Ends, Assembly Position=Any.
Solenoid Valve Cpe24-M1H-5L-3/8 High Component Density Valve Function=5/2 Monostable, Type Of Actuation=Electrical, Width=24 Mm, Standard Nominal Flow Rate=2900 L/Min, Operating Pressure=2,5 - 10 Bar.
Guided Drive DFM-63-25-P-A-KF Centre Of Gravity Distance From Working Load To Yoke Plate=50 Mm, Stroke=25 Mm, Piston Diameter=63 Mm, Operating Mode Of Drive Unit=Yoke, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends.
Compact Cylinder Adn-5/8"-2"-A-P-A With Position Sensing And External Piston Rod Thread Stroke=2 ", Piston Diameter=5/8", Piston Rod Thread=10-32 Unf-2A, Based On The Standard=Iso 21287, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends.
Standards-Based Cylinder DNC-100-400-PPV Stroke=400 Mm, Piston Diameter=100 Mm, Piston Rod Thread=M20X1,5, Cushioning=Ppv: Pneumatic Cushioning Adjustable At Both Ends, Assembly Position=Any.
Pneumatic Valve Vuwg-L10A-P53U-M3 Valve Function=5/3 Pressurised, Type Of Actuation=Pneumatic, Valve Size=10 Mm, Standard Nominal Flow Rate=90 L/Min, Operating Pressure=-0,9 - 10 Bar.
Cutter Diameter Inch 2 Cutting Width Inch 14 Tooth Configuration Plain Material High Speed Steel FinishCoating Uncoated Arbor Hole Diameter Inch 12 Number of Teeth 14.
22mm Diameter x 22mm Shank 2-Flute Regular Length Yellow Series Carbide End Mills The TiAlN coating enables increased speed and feed capabilities and enhanced tool life.
Cutting Diameter Inch 38 Number of Ball Nose Inserts Used on Toolholder 1 Insert Style JM Series Jet Mill Shank Type Cylindrical Shank Diameter Inch 12 High accuracy indexable end mill for mold finishing Optimum machining of mold has been achieved due to the MQL system Easy clamping with simple screw on system Coolant through.
Drill Bit Size Inch 5764 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required 118Deg point.
Drill Bit Size mm 215 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required Heavy duty 135Deg split point Sizes over 12 furnished with notched point.
Drill Blank Size Inch 764 Drill Blank Size Decimal Inch 01094 Blank Length Inch 258 Made from hardened HRC 6365 high speed steel and ground, can be used as punches, gauges, pins or ground for special tools High Speed Steel 00000 00003.
Connection Type Arbor Circle Diameter Inch 18 Diameter of Cutter Inch 2 Arbor Hole Diameter Inch 78 Number of Teeth 14 Material High Speed Steel High Speed Steel.
Drill Bit Size Inch 11116 Shank Taper Designation MT5 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 18 Through Coolant No.
Drill Bit Size mm 375 Shank Taper Designation MT4 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Overall Length Inch 1478 Through Coolant No.