Diamond Turning Insert, Inscribed Circle 1/2 in, Bright (Uncoated), ANSI Code CNG453T0820, Clearance Angle 0 Degrees.

Ball End Mill, 3/16 in Milling Dia., Carbide, Non-Coolant Through.

Spiral Flute Tap, Thread Size M10x1.30 mm, HSS-E, Black Oxide, Thread Length 19.

Toolholder.

0830 In.

00 mm, Metric, 30xD.Extra Long Drill Bit, Drill Bit Size 6.

Diamond Turning Insert, Chip-Breaker Code RH, Inscribed Circle 5/8 in, TiN, ANSI Code CNMG544RH, Chip-Breaker Style On Two Sides, Clearance Angle 0 Degrees.

, Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Fractional Inch, 0.Corner Radius End Mill, 1/2 in Milling Dia.12 in, 3/4 in, 4 31/32 in.

End Mill Holder,Taper,BT30 1 in, Measurement System Fractional Inch.

5500 in, ANSI Code M270BD037C050L550, Compatible Hardware Insert Screw M3x0.5 x 8. 3/8 in, Shank Dia.

End Mill Holder,Taper,PSC63 63.00mm, Measurement System Metric.

Indexable Cutting Head Unit, Insert Shape 80 Degrees Diamond, Overall Length 104.00mm, Screw Clamp, Coolant Through, Boring, Right Hand.95mm, KM40TSS16FSCLPR09, 95 Degrees , 11.

00mm 12.

00mm, ANSI, DIN 6499, ISO.COLLET ERTC25 M4-M16 6 Size Not Applicable, Overall Length 34.

, Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Decimal Inch, 1.Corner Radius End Mill, 0.2500 in, 6.

Exchangeable Drill Tip, TDM1, Shank Type - Machining Straight with Three Flats, High Speed Steel.

Insert.

Parting and Grooving Insert, Right Hand.

Hydraulic Chuck, Shank Type - Machining Straight, BTKV50.

, Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Decimal Inch, 45 Degrees , 0.End Mill, 0.2500 in.

Spiral Point Tap, Thread Size 1/4 In.

-7, UNC, Overall Length 5 3/4 in, High Speed Steel, Black Oxide, Thread Length 1 11/16 in, 75 Percent Thread Drill Size 1 1/32 in, Thread Limit H6, Class of Fit 3B, Thread Direction Right Hand, Number of Flutes 4.

Triangle Turning Insert, Chip-Breaker Code FP, Inscribed Circle 3/8 in, TiN.

27 mm, Thread Limit H4, Class of Fit 3B.

Reducer.

1620 in, ANSI Code WG0412M04U04PT, Chip-Breaker Code PT, Chip-Breaker Style On One Side, Clearance Angle 10.

00 mm.50mm Milling Dia.

50 mm, 57.00 mm., Carbide, Non-Coolant Through, Straight, Metric, 0.50mm, 4.

6 mm, Thread Limit H3, Thread Direction Right Hand, Number of Flutes 4.Tap, Tap Thread Size #12-28, High Speed Steel, Bright (Uncoated), Thread Standard UNF, Thread Length 15/16 in, Overall Length 2 3/8 in, 75 Percent Thread Drill Size 4.

00mm, Coolant Fed Coolant Through.50mm, Projection 55.Shell Mill Holder,BTKV40,1-3/4 1-3/4 in, Pilot Length 18.