70 x 45 mm Phillips Pan Machine Screw, Zinc Plated Steel, 50 PK Commonly used with flat or lockwashers. Especially useful in metal-to-metal or where heavy duty fastening is required.

80 Int Thrd Sz, 12.MIDWEST FASTENER 32775 Knife Thread Insert, M5-0.

A hex cap screw has a hexagonal head, designed to be driven by a wrench.

Cuts up to 1-1/2"; 2-piece tip.

.For Sanding and Finishing of: wood, paint, filler, drywall compound, spackle, plastic, metal and fiberglass.

320 Grit Aluminium Oxide, Garnet Color Sandpaper 4-1/2" x 11" Sheet (100 Sheets), 100PK The sheets are glue bonded and feature an open coat paper backing..

.

.100 Grit Premium Woodworking Sandpaper 5-1/2" x 9" Sheet (24 Sheets), 24PK This material is an excellent substitute for garnet paper, and in most applications will outlast garnet. Manufactured from a unique Aluminum Oxide, which fractures into new, sharp edges as it wears. These abrasive sheets are the choice of professional woodworkers for sanding a wide variety of bare and unfinished goods.

240 Grit Silicon CarbideSandpaper 5-1/2" x 9" Sheet (40 Sheets), 40PK It is best for metals (particularly harder metals) and is the only grain that can be used on glass, stone and marble..

.R-334 Square O-Ring (ID: 2 5/8", CS 3/16", OD 3"), 8PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

R-007 Square O-Ring (ID: 5/32", CS 1/16", OD 9/32"), 60PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

R-203 Square O-Ring (ID: 5/16", CS 1/8", OD 9/16"), 60PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces..

.R-040 Square O-Ring (ID: 2 7/8", CS 1/16", OD 3"), 48PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

.R-033 Square O-Ring (ID: 2", CS 1/16", OD 2 1/8"), 48PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

.280 Grit Premium Woodworking Sandpaper 4-1/2" x 11" Sheet (6 Sheets), 6PK This material is an excellent substitute for garnet paper, and in most applications will outlast garnet. Manufactured from a unique Aluminum Oxide, which fractures into new, sharp edges as it wears. These abrasive sheets are the choice of professional woodworkers for sanding a wide variety of bare and unfinished goods.

.500 Grit Silicon CarbideSandpaper 4-1/2" x 11" Sheet (40 Sheets), 40PK It is best for metals (particularly harder metals) and is the only grain that can be used on glass, stone and marble.

.1200 Grit Silicon CarbideSandpaper 3-2/3" x 9" Sheet (15 Sheets), 15PK It is best for metals (particularly harder metals) and is the only grain that can be used on glass, stone and marble.

. Sheet, 2PK These abrasive sheets are the choice of professional for sanding a wide variety of bare and unfinished goods. x 9 in.

x 5-1/2 in. Sheet, 80PK These abrasive sheets are the choice of professional for sanding a wide variety of bare and unfinished goods.

.R-357 Square O-Ring (ID: 5 1/2", CS 3/16", OD 5 7/8"), 240PK The o ring is placed into a groove to secure them in place, and then compressed between two surfaces.

.

Reinforced palm patch, reinforced fingers and thumb.

BOSS MGR250B Stereo-Gauge Bt/Usb 200W, #MGR250B.

DD DURASYNC TORQUE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type They offer a dependable, economical and hasslefree alternative to chain drives DURASYNC TORQUE synchronous belts feature an HTD tooth profile They are manufactured with a heavy duty, woven, nylon based fabric tooth covering The helically wound tensile cords are engineered, twisted and chemically set stranded fiberglass material They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable All DURASYNC TORQUE timing belts are manufactured using the latest in synchronous belt technology.

DD PowerDrives urethane steel timing belts include DURASYNC TORQUE URETHANE STEEL, DURATRUE TORQUE URETHANE STEEL, and DURAABSOLUTE TORQUE URETHANE STEEL These belt lines meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturers belts of the same type They are manufactured with a urethane body and continuous helically wound steel cable cords These belts are ideal for situations where high stress and load demands exceed the performance capabilities of spliced belts DD urethane steel timing belts are suitable for all power transmission, high speed, and severe conveying applications They are proven through thousands of hours of customer use to be durable and dependable All DD PowerDrive urethane synchronous belts are manufactured using the latest in synchronous belt technology.

DD DURAPRIME BAND WEDGE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type DURAPRIME BAND WEDGE belts give superior belt performance proven through thousands of hours of customer use to be durable and dependable The backing attaches the individual belts together, and is made of heavy duty woven fabric encapsulated in rubber for superior flexibility The helically wound tensile cords are specially manufactured with, twisted, heat and chemically set, polyester material The body rubber is a highly engineered synthetic rubber compound, specially compounded for cool running, crack resistance, and excellent bonding to the outside fabric and tensile cords DURAPRIME BAND WEDGE Belts have a more narrow, deeper wedge shape V with higher power capability and more efficient load carrying characteristics They allow for smaller and more compact drives All DURAPRIME BAND WEDGE belts are manufactured using the latest in belt technology.

DD DURAPRIME RIB PRO SERPENTINE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type DURAPRIME RIB PRO SERPENTINE ribbed belts are designed for high speed and high drive ratio applications They are made of abrasion and heat resistant material, and are proven through thousands of hours of customer use to be durable and dependable All DURAPRIME RIB PRO SERPENTINE polybelts are manufactured using the latest in belt technology.

DD DURAPRIME BAND METRIC CLASSICAL belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type DURAPRIME BAND METRIC belts give superior belt performance proven through thousands of hours of customer use to be durable and dependable The backing attaches the individual belts together, and is made of heavy duty woven fabric encapsulated in rubber for superior flexibility The helically wound tensile cords are specially manufactured with, twisted, heat and chemically set, polyester material The body rubber is a highly engineered synthetic rubber compound, specially compounded for cool running, crack resistance, and excellent bonding to the outside fabric and tensile cords All DURAPRIME BAND METRIC belts are manufactured using the latest in belt technology.

DD DUAL DURAPRECISION TORQUE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type They offer a dependable, economical and hasslefree alternative to chain drives DUAL DURAPRECISION TORQUE synchronous belts feature a dual sided RPP tooth profile Double sided timing belts offer power transmission from both sides, and are often used in reversing and serpentine applications They are manufactured with a heavy duty, woven, nylon based fabric tooth covering The backing is precisely ground for smooth uniform running The helically wound tensile cords are engineered, twisted and chemically set stranded fiberglass material They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable They are engineered for hightorque synchronous drives All DUAL DURAPRECISION TORQUE timing belts are manufactured using the latest in synchronous belt technology.

DD DURAPREMIUM TORQUE belts meet or exceed USA RMA published ratings levels They are manufactured to perform at identical or higher levels than all major US Manufacturer's belts of the same type They offer a dependable, economical and hasslefree alternative to chain drives DURAPREMIUM TORQUE synchronous belts feature a classic trapezoidal tooth profile The tooth profile is low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces They are manufactured with a heavy duty, woven, nylon based fabric tooth covering The helically wound tensile cords are engineered, twisted and chemically set stranded fiberglass material They are made with a high temperature chloroprene polymer throughout the belt, and are proven through thousands of hours of customer use to be durable and dependable All DURAPREMIUM TORQUE timing belts are manufactured using the latest in synchronous belt technology.