- Special geometry for optimum swarf evacuation.5 mm Tapping hole dia : 24. - HSS-E-PM tool material for maximum wear resistance. HSS-E-PM Through Hole Machine Tap, 26X1.

7 mm Head height h: 16.Single ended ratchet ring wrench fully insulated- Width across flats: 19mm wrench length L: 200 mm Ring D: 39. Material: Chrome vanadium steel.1 mm With plastic insulation up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.

V-Belt, Cogged 3/8 X 50.

OC, 2 Band OC, 2 Band.Belt, 3V, 3/8 x 90 in.

Belt, B Kevlar, 5/8 x 392 in.

Belt, B/5L, 21/32 x 190 in. OC OC.

OC, 5 Band OC, 5 Band.Belt, 8V, 1 x 200 in.

Belt, C, 7/8 x 188 in. OC OC.

Belt, B Kevlar, 5/8 x 166 in. OC OC.

OC OC.Belt, BX Cogged, 21/32 x 63 in.

Belt, B Kevlar, 5/8 x 123 in. OC OC.

6 in. OC OC.

Belt, B, 21/32 x 95 in. OC, 3 Band OC, 3 Band.

Belt, 5VX Cogged, 5/8 x 86 in.

Belt, CX Cogged, 7/8 x 68 in.

Belt, XPA Cogged, 13 x 1650mm LP.

Belt, C, 7/8 x 162 in.

OC, 2 Band OC, 2 Band.Belt, A, 1/2 x 100 in.

OC OC.

Belt, C, 7/8 x 113 in.

V-Belt, Variable Speed 7/8 X 27.

Belt, C, 7/8 x 321 in.

EAGLE TAPTEK CUTTING TOOLS HT-7500-10-T-I 3/4in TPI 10 TAPER HAND TAP.

EAGLE TAPTEK CUTTING TOOLS CHD-1024-I 10-24NC CARBON HEX DIE RETHREAD.

EAGLE TAPTEK CUTTING TOOLS SDS4350-12500-12-D 1-1/4X12-3/4 OAL SDS MASONRY.

EAGLE TAPTEK CUTTING TOOLS TFZ-25288-ET 2-3/4X2inLOC COBALT UNIVERSAL ANNULAR.

EAGLE TAPTEK CUTTING TOOLS A700-014-I 7/32X6 OAL HIGH SPEED STEEL AIRCRAFT DRILL.

EAGLE TAPTEK CUTTING TOOLS AC712-005-I 5/64 COBALT AIRCRAFT DRILL 12in OAL.

EAGLE TAPTEK CUTTING TOOLS CHD-7500-16-I 3/4-16NF CARBON HEX DIE.

EAGLE TAPTEK CUTTING TOOLS HT-264-B-I 2in TPI 64 BOTTOM HAND TAP.