8, Housing Material Alloy Steel, Shank Thread Direction Right Hand, Ball Diameter 5 mm, Housing Material Finish Black Oxide, Maximum Ball Swivel Not Applicable, Overall Length 56 mm, Race Material Not Applicable.Rod End Bolt, System of Measurement Metric, Ball Stud Center Length Not Applicable, Ball Stud Thread Length Not Applicable, Ball Stud Thread Size Not Applicable, Bore Diameter 5 mm, Head Outside Diameter 12 mm, Head Width 6 mm, Shank Thread Length 36 mm, Shank Thread Size M5-0.

Ultra Low HD SHCS 316 SS, 1/4-20X1-1/2.

Spiral Wound Flange Gasket, For Flange ANSI Class 600, For Pipe Size 12 in, Inside Diameter 12 15/16 in, Outside Diameter 18 in, Thickness 3/16 in, Rim Stripe Color Gray, Outside Rim Color Yellow, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -320 Degrees F, Maximum Operating Temperature 842 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 304, Inner Ring Material None.

Fuse, 12 A, 600V AC, 300V DC, Class RK5, FLSR Series, Nonindicating, Time Delay, Body Style Cylindrical, Fits Fuse Block Style Rejection, Interrupt Rating 200kA at 600V AC, 20kA at 300V DC, Fuse Size 5 in L x 13/16 in dia, Length 5 in, Diameter 13/16 in, Equivalent Brand and Series Bussmann FRS-R, Edison ECSR, Littelfuse FLSR, Mersen TRS-R, Equivalent Series ECSR, FLSR, FRS-R, TRS-R, Compatible Fuse Block Series LFR, Body Material Fiberglass, Dual Element.

7/8" W x 119" L Multiple V-Belt 1 Rib C115 PK2.

Leather Gloves, Hand Protection Style Glove, Additional Hazard Protection None, Leather Glove Style Drivers, ANSI/ISEA Impact Level Not Tested, Finger Coverage Full Finger, Stitching Material Cotton/Polyester, Insulated Yes, Leather Coverage Style Full Leather, Standards Not Applicable, Glove Hand Style Left and Right, Thumb Style Straight, Glove Insulation Material Fleece, Cuff Style Shirred Slip-On, Glove Liner Material Cotton Fleece, Leather Grade Premium, Oil-Resistant No.

Bin Dividers Short.

85 lb, Thickness 0. 180 Degrees F Pull 36.Rare Earth Magnet Material,36.125 in, Diameter 1 in, Hole Dia.

SS Bar/Rod,304,4.,2 ft. O.D.

D.O.SS Bar/Rod,303,3 In.,1 ft.

SS Bar/Rod,17-4,1. O.,3 ft.,3 ft.

,3 ft.. O.,3 ft.

SS Bar/Rod,316/L,2" O. O.,4 ft.

Item Mounting,Hardware Nexus.

Seal Gasket 10Pcs Of 9Bu097 Connelly Spa.

Carbide End Mill,3/4in dia,1-1/2in Cut L 3/4 in.

1650, Thread Limit D20, Thread Direction Right Hand, Number of Flutes 5.5, Metric Coarse, Overall Length 180.Spiral Flute Tap, Thread Size M33x3.00 mm, 75 Percent Thread Drill Size 1.

20 mm, Thread Limit H3.-12, UNS, Plug, Overall Length 3 9/16 in, High Speed Steel, Bright (Uncoated), Left Hand, Thread Length 1 1/4 in, 75 Percent Thread Drill Size 12.Straight Flute Tap, Thread Size 9/16 In.

00 mm, High Speed Steel, Black Oxide, Thread Length 16.

08, Thread Limit D19, Thread Direction Right Hand, Number of Flutes 5.

Knurl Wheel,M Series,RH DIAG,1 In,20 TPI 1 in.

2X 30In 9Oz Or Fr F-Flex Jkt.

Adjustable Locations Back, Apron Type Bib Apron, Color Green, Fabric Weight 12 oz, Features Snap Fasteners with Cotton Adjustment Strap Around Back of Bib, Heat Protection Type Flames, Sparks, Includes Sleeves Yes, Length 20 in, Material Cotton, Size 2XL, 2X 20In Grn Wc Bib.

24X36 Lth Dk Brwn Sl Bib Apron.

.Solid Router Bit, Primary Material Application Composite, Spiral O-Flute Upcut, Fractional Inch, 1/2 in Cutter Dia.

Black 45mm Single Mesh Retainer.

M5 Ball End T-Handle Hex Wrench.

Anchor Fastener W/ Drop-In,10 S.

Black 10 S Rt Angle 90 Deg Living Hinge.

End Cap Red W/Push-Ins 3030.