•Chemical Resistance•DFC Disc Brake Hardware Kit•High Heat Resistance•Corrosion Resistance•Low Coefficient Of Friction•Easy Assembly & Removal.Often overlooked during a brake repair, the disc brake hardware can be stressed, fatigued, or corroded within 1-2 years, which leads to a reduction in spring tension, excessive caliper movement, premature/uneven wear, and noise.

Fiber Disc, Abrasive Type Coated, Abrasive Material Ceramic, Backing Material Fiber, Backing Weight Not Applicable, Grit 80, Overall Diameter 4 1/2 in, Series Predator, Coating Coverage Closed, Resistance Properties Heat, Connector Size 5/8 In.

Conn Bolt,1/4-20X70mm, Steel Nickel.

Shoulder Screw,316 SS,10-32",3/16 L.

Shoulder Screw,316 SS,M6x1mm,100mm L.

00 mm.

, Bright (Uncoated), Fractional Inch, 3/8 in.0 Degrees Taper Angle per Side, 3/32 in Tip Dia.Tapered End Mill, Tapered, Cobalt, 7.

-24, UNF, Overall Length 2 23/32 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 11/16 in, 75 Percent Thread Drill Size I, Thread Limit 2B, Class of Fit H3, Number of Flutes 3.Spiral Point Tap, Thread Size 5/16 In.

2055, Wire, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2.Jobber Length Drill Bit, Drill Bit Size #5, Drill Bit Point Angle 140 Degrees , Carbide, WXS, Decimal Equivalent 0.

, Bright (Uncoated), Fractional Inch, 3/16 in.Tapered End Mill, Tapered, Cobalt, 2.0 Degrees Taper Angle per Side, 3/32 in Tip Dia.

1360, Wire, Drill Bit Point Type X Thinning Point, Non-Coolant Through.Jobber Length Drill Bit, Drill Bit Size #29, Drill Bit Point Angle 130 Degrees , Powdered Metal, V, Decimal Equivalent 0.

Carbide End Mill,1/4in dia,1-1/8in Cut L 1/4 in.

Jobber Length Drill Bit, Drill Bit Size 1/4 in, Drill Bit Point Angle 120 Degrees , High Speed Steel, TiN, Decimal Equivalent 0.2500, Fractional Inch, Drill Bit Point Type Notched Point, Non-Coolant Through.

-24, UNF, Overall Length 2 23/32 in, High Speed Steel, Black Oxide, Thread Length 7/16 in, 75 Percent Thread Drill Size I, Thread Limit H2, Thread Direction Right Hand, Number of Flutes 3.

.Solid Router Bit, Primary Material Application Composite, Straight O-Flute, Fractional Inch, 1/4 in Cutter Dia.

Nonsparking Socket, Socket Size 9/32 in, 6-Point, Aluminum Bronze, Natural, Standard, Hand, Drive Size 1/4 in, SAE, Impact Rated No, Standards FM Approved, ASTM A342.

0005 in, Helical, 35 Degrees , General Purpose.Micro Drill, Drill Bit Size 1.15 mm, Drill Bit Point Angle 130 Degrees , 4 Facet Point, Carbide, Bright (Uncoated), +0.

Carbide Bur,Radius/Ball Nose,1/2in,SF5RA 1/4 in, Head Dia. 1/2 in, Length of Cut 1-1/4 in, Overall Length 3-1/4 in, Trade Number SF-5RA.

Not Applicable.2-Flute PM+™ HSS-E Square CC Single Finishing End Mill Cleveland PM-2-TC TiCN 1/8x3/8x3/8x2-5/16 3/8 in, Neck Dia.

Reduced Shank Drill Bit, Drill Bit Size 15/32 in, 135 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide.

Ball End Mill, 5/8 in Milling Dia.

Center Drill, Plain, Carbide, 82 Degrees , #00.

Socket Extension, Output Drive Size 1/4 in, Output Drive Shape Square, Output Drive Gender Female, Input Drive Size 1/4 in, Input Drive Shape Square, Input Drive Gender Female, Overall Length 6 in, Hand, Alloy Steel, Chrome.

-20, UNC, Overall Length 2 1/2 in, HSS-E, Bright (Uncoated), Thread Length 5/8 in, 75 Percent Thread Drill Size #7, Thread Limit H3, Class of Fit 3B, Thread Direction Right Hand, Number of Flutes 3.

Spiral Point Tap, Thread Size #5-44, UNF, UNJF, Overall Length 1 15/16 in, High Speed Steel, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 2.60 mm, Thread Limit H2, Class of Fit JIS 2, Number of Flutes 2.

Countersink, 90 Degrees , 1/2 in, High Speed Steel, Bright (Uncoated).

Center Drill, Plain, High Speed Steel, 90 Degrees , #4-0.

5 ft-lb/in, Friction Coefficient 0.

0 ft-lb/in, Friction Coefficient 0.036 lb/cu in, Corrosion and Chemical Resistance Good.125 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.

Lined Wrapped Plain Sleeve Bearing.