Category Features Company
0.1875" (3/16) Shank DIA x 60° included Carbide Marking Cutter for Non-Ferrous, 2 Flutes.
$42.49
9400" Length of Cut Carbide Ball End Mill, 3 Flutes.0.0780" (5/64) Cutter DIA x 0.
$89.99
0220" Cutter DIA x 0.0.0330" Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN Coated.
$47.69
1250" (1/8) Cutter DIA x 0.0.3750" (3/8) Length of Cut Carbide Deburring Ball End Mill, 16 RH Teeth, 13 LH Teeth, AlTiN Coated.
$50.49
0720" Cutter DIA x 0.
$32.39
0460" Pilot DIA Carbide 5° Flare Corner Rounding End Mill DE, 2 Flutes, AlTiN Coated.0.0390" Radius x 0.
$79.59
0.0945" Reamer DIA x 0.
$55.99
0670" Length of Cut x 0.0450" Cutter DIA x 0.0.
$72.99
2500" (1/4) Reach Carbide Ball End Mill for Aluminum Alloys, 3 Flutes, TiB2 Coated.0.
$112.55
0.0930" (3/32) Cutter DIA x 0.
$103.99
1870" (3/16) Neck Length Carbide Double Angle Shank Cutter, 2 Flutes.0780" (5/64) Cutter DIA x 0.
$75.99
0430" Length of Cut Carbide Ball End Mill, 4 Flutes.0.0290" Cutter DIA x 0.
$46.15
000 mm Cutter DIA x 10.
$59.55
0300" Cutter DIA x 0.1560" (5/32) Length of Cut Carbide Tapered Square End Mill, 3 Flutes, AlTiN Nano Coated.
$78.49
0.0620" (1/16) Cutter DIA x 0.
$74.79
IRIDIUM 3x5" Grip 54H 400.
$23.99
OSP-3 Primer Preparation 6" Grip.
$51.45
Backup Pad 3"x5" Grip 54H (for MR-35SGV).
$45.35
2L, Polished The perfect teapot for after dinner dessert, coffee, and tea!.Stainless steel teapot, 1.
$46.69
WHEEL CHOCKS WC811-7B 11.375" X 8.625" Wheel Chocks.
$55.69
1 T-15 No Lead Bronze Y-Strainer.
$48.99
1" x 3/4" - 6 Outlet x 1/2" PPSU F1960 PEX Multi-Port Tee.
$27.75
3/4" China Galvanized Cap FNPT.
$2.85
1" PEX Plug Plastic Fitting.
$1.49
1" x 3/4" x 1" SA Galvanized Reducing Tee FNPT x FNPT x FNPT.
$7.09
2" T-367DI BUTTERFLY VALVE.
$73.85
4" 90 .304 Stainless Steel Elbow, FNPT x FNPT.
$118.99
1/2" S-1001 Forged Brass Full Port Ball Valve.
$8.99
3/4" x 1/2" PEX x MNPT Adapter Plastic Fitting.
$1.35
2 T-416 Rising Stem Bronze Gate Valve.
$138.99