-11, Overall Length 4 1/4 in, Tensile Strength 125,000 psi, System of Measurement Inch, Thread Direction Right Hand, Material Quality Standards ASTM A193, Maximum Temperature 977 Degrees F, Minimum Temperature -58 Degrees F, Minimum Yield Strength 105,000 psi, Rockwell Hardness C35 Max, Package Quantity 100.Fully Threaded Stud, Material Grade/Class B16, Material Steel, Finish Black Oxide, Thread Size 5/8 In.

Dowel Pin, Pin Type Press Fit, Material Stainless Steel, Material Grade/Class Grade A1, Finish Plain, Pin Diameter 2 mm, Product Type Dowel Pin, Shank Length 12 mm, System of Measurement Metric, Nominal Diameter 2 mm, Standards D7, Pack Size Small Pack, Manufacturer Location Globally Sourced, Dimensional Standards DIN 7, Package Quantity 10.

020 in.11 in, Minimum Chamfer Length 0.

375 in, Head Diameter 0.

Grade 8, 1/4"-20 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 1-5/8 in L, 100 PK Thread Length 3/4 in, Head Height 5/32 in, Head Width 7/16 in, Package Quantity 100.

2, Shank Length Tolerance +/-0.025 in, Product Type Not Applicable.075 in, Fits Minimum Hole Diameter 5/64 in, Fits Maximum Hole Diameter 5/64 in, Shank Length 1/4 in, Maximum Chamfer Length 0.

078 in, Dimensional Standards DIN 913, Head Height Not Applicable, Maximum Head Height Not Applicable, Maximum Temperature 302 Degrees F, Minimum Head Height Not Applicable, Minimum Temperature -58 Degrees F, Package Quantity 50.Socket Set Screw, Head Type Headless, Point Type Flat, System of Measurement Metric, Thread Size M12-1.

Wedge Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Thread Size 3/8 In.-16, Overall Length 3 3/4 in, Thread Length 2 1/4 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 3/8 in, Minimum Installation Depth 1 1/2 in, Ultimate Tension Strength (4,000 psi Concrete) 3,300 lb, Wedge Anchor Type Wedge Anchor, Seismic Approved No, ICC Approved for Cracked Concrete No, ICC Approved for Un-Cracked Concrete No.

5 mm, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards DIN 912, Flange Diameter Not Applicable, Flange Thickness Not Applicable.8, Minimum Thread Length 8 mm, Fastener Length 8 mm, Head Height 5 mm, Head Diameter 8.

Not Graded, 3/8"-24 Hex Head Cap Screw, Plain 18-8 Stainless Steel, 7/8 in L, 50 PK Thread Length 7/8 in, Head Height 15/64 in, Head Width 9/16 in, Package Quantity 50.

3, Flange Diameter Not Applicable, Flange Thickness Not Applicable.-20, Minimum Thread Length 1 in, Fastener Length 5 in, Head Height 0.Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 3/16 in, Material Steel, Finish Black Oxide, Thread Size 1/4 In.

Grade 5, 1-1/4"-7 Hex Head Cap Screw, Black Oxide Steel, 2-1/2 in L Thread Length 2 1/2 in, Head Height 25/32 in, Head Width 1 7/8 in.

-10, Minimum Thread Length 2 in, Fastener Length 4 in, Head Height 0.3, Flange Diameter Not Applicable.75 in, Head Diameter 1.

412 in, System of Measurement Inch, Drive Phillips, Point Type AB.

Grade 8, 7/16"-20 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 6 in L, 5 PK Thread Length 1 1/8 in, Head Height 9/32 in, Head Width 5/8 in, Package Quantity 5.

065 in, Minimum Chamfer Length 0.

1, Package Quantity 100.

Non-Programmable Fan Coil Thermostat, Includes Mounting Screw.

Linear Actuator, Rated Load 450 lb, Stroke Length 12 in, Speed @ Rated Load 0.26 in/sec, Duty Cycle 17 Percent, Voltage 115V AC, 1.4 A Full Load Amps, Retracted Length 19 2/5 in, Motor Type AC, Capacitor Included Yes, Yes Capacitor Required, Limit Switch Type Adjustable, Screw Type Acme, Nut Material Delrin, Standards CE Compliant, UL Recognized.

Regulator,2",NPT,Lead Free Model Number LF25AUB-Z3, Fits Brand Watts.

Humidifier Bottle, Fits Brand Liebert.

Operator.

Socket Head Cap Screw.

SHCS 17-4PH SS USA, 4-40X3/16.

Socket Head Cap Screw.

Socket Head Cap Screw.

Ruby Contact Point,2mm,4-48.

Panel Nut, Finish Zinc Plated, Material Grade/Class Not Graded, Material Steel, Thread Size 15/32 In.

ASME Skt Shdr Screw Alloy USA,5/32,6-3.

Shoulder Screw,Alloy, M4x0.7mm,10mm L.