x36 In.Corkboard,Keylime/Black,48 In..

x3.Sliding Glass Enclosed Letterboard,60 In.

Corkboard,Pearl/Satin,48 In.

Corkboard,Pearl/Blck,48" x 36" x 36 In..

.x36 In.Corkboard,Pearl/Gold,60 In.

SOUTHWIRE SFF22 Notched Square Strut Washer, 1/2 Bolt Plated Steel, 1-5/8.

CP124 CLUTCH PUMP ACCESSORIES: Type K, 8 Groove Serpentine Clutch assembly, 120 lb. ft..

Coating Thickness Calibration Kit.

Universal Products.

.JW Winco GN115-SC-36-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

Socket head cap screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.

GN 42 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the stud / socket versions.

.DIN 444 precision type swing bolts are mainly used for jigs and fixtures.

GN817-4-6-M8X1-CK Indexing Plunger Type G and GK with threaded stem are for applications where a special knob or attachment is required, or for such cases where the spindle is linked directly to an operating mechanism.

GN478-B16-M8-MT Mounting Connector GN 478 connector mini-clamps are designed primarily for use with sensor brackets and mounting brackets.

.10-32-M6-20-KU Hand Knob The plastic tip on the stud prevents indentations or other damage from occurring.GN6336.

.JW Winco GN717-5-M8-CK-NI Indexing Plunger These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 42 leveling feet are simple, economically priced components and can be used universally thanks to the wide range of possible combinations of the base and the stud / socket versions.

In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.GN473-29-B8-ELS 2-Way Base Connector The bore spacing of the GN 473 two-way base connector mini-clamps corresponds the connector mini-clamps and flange bolts..

.Countersunk Washer, Fits Bolt Size M6 18-8 Stainless Steel, Matte Shot-Blasted Finish A typical application example would be the retention of a handwheel with keyway to a shaft.

DIN906-ST-M14X1.5-GPC Threaded Plugs, Tapered Thread The tightness depends on the medium, pressure, temperature and material pairing..

1-0.

GN300-63-5/16X18-45 Adjustable Lever Steel The insert is connected to the lever via serrations that can easily be disengaged..

.GN598-KT-28-M10 Revolving Handle Steel handles are mainly used on safety clutch handwheels to increase imbalance and thus avoid free wheeling.

5 technopolymer knobs with stainless steel threaded stud extend the range of clamping applications.

DIN 468 off-set crank handles are available with steel hand pieces as standard.

2 adjustable levers are the result of modern industrial design: glass fiber reinforced thermoplastic with molded-in stainless steel inlay and zinc plated components..Made in the USA, WN 300.

GN565-26-M8-112-BL Cabinet U-Handle The manufacturing process allows the production of special designs in relatively small quantities..

.JW Winco GN115-VDE-36 Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

JW Winco WN6000408 Cross Block They provide a simple, one piece solution for applications that require height and width adjustments.