reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Sharpening Abrasives,Sharpening Stones
NORTON ABRASIVES

Single Grit Benchstone,S/C,Medium

About The Abrasive Benchstone, Single Grit, Silicon Carbide Abrasive, Grit Type Medium, Size 4 x 1 x 1/4 In, Gray, For Cutlery, Woodworking Tools and Other Precision Tools and Instruments

Abrasive Benchstone, Single Grit, Silicon Carbide Abrasive, Grit Type Medium, Size 4 x 1 x 1/4 In, Gray, For Cutlery, Woodworking Tools and Other Precision Tools and Instruments

Sharpening Abrasives,Sharpening Stones

Single Grit Benchstone,S/C,Medium

Sharpening Abrasives,Sharpening Stones

Specifications of Single Grit Benchstone,S/C,Medium

Category
Instockinstock

Last Updated

Single Grit Benchstone,S/C,Medium
More Varieties

Rating :- 8.12 /10
Votes :- 29
Radial Ball Bearing,Sealed,35mm Bore Dia

Radial Ball Bearing,Sealed,35mm Bore Dia

Radial Ball Bearing, Bearing Industry Number 6207, Bore Diameter 35 mm, Closure Double Sealed, Outer Ring Width 17 mm, Outside Diameter 72 mm, Ring Material Alloy Steel, Seal Type Contact, System of Measurement Metric, Cage Material Steel, ABEC Rating 1, Application High Heat Application, Ball Material Alloy Steel, Bore Diameter Tolerance +0/-12 micron, Cage Type Pressed, Dynamic Radial Load Capacity 28,400 N, Fillet Radius 1 mm, Finish Chrome Plated, Includes Retaining Ring No.

  • Bearings,V-belts & Power Transmission Equipment,Ball Bearings,Radial Ball Bearings
  • NTN
    • Tapered Roller Bearing Assy.,1.875in

    Tapered Roller Bearing Assy.,1.875in

    5 in, Ring Material Carbon Steel, Roller Material Carbon Steel.875 in, Flange Diameter Not Applicable, Flange Type Non-Flanged, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 11 3/8 in, Overall Width 2.Tapered Roller Bearing Assembly, Bearing Industry Number HM237535/HM237510, Bore Diameter 6 1/2 in, Bore Type Cylindrical, Cage Material Pressed Steel, Cone Width 2.5 in, Cup Width 1.

  • Bearings,V-belts & Power Transmission Equipment,Roller Bearings,Tapered Roller Bearings
  • NTN
    • Actuator, Rated Load 225 lb, Stroke Length 300 mm, Speed @ Rated Load 5.5 mm/sec, Duty Cycle 25 Percent, Voltage 12V DC, 3.2 A Full Load Amps, Retracted Length 407 mm, Max.

    Actuator, Rated Load 225 lb, Stroke Length 300 mm, Speed @ Rated Load 5.5 mm/sec, Duty Cycle 25 Percent, Voltage 12V DC, 3.2 A Full Load Amps, Retracted Length 407 mm, Max.

    65 Degrees C/149 Degrees F, Enclosure Type IP54, Limit Switch Type Preset, Drive System Type Gear, Standards CE Compliant, Electromagnetic Compatibility Directive 2014/30/EU, Medical Device Directive 93/42/EEC (LD3M only).Actuator,12VDC,Rated Load 225 lb Ambient Temp.

  • Bearings,V-belts & Power Transmission Equipment,Linear Motion,Mechanical Actuators
  • NTN
    • Tapered Roller Bearing Cone,1-3/4

    Tapered Roller Bearing Cone,1-3/4

    854 in, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 3.15 in, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Inch, Dynamic Load Capacity 15,600 lbf.

  • Bearings,V-belts & Power Transmission Equipment,Roller Bearings,Tapered Roller Bearings
  • NTN
    • Tapered Roller Bearing Cone,1-3/4

    Tapered Roller Bearing Cone,1-3/4

    854 in, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 3.Tapered Roller Bearing Cone, Bearing Industry Number 355X, Bore Diameter 1 3/4 in, Bore Type Tapered, Cage Material Chrome Steel, Compatible Cup Manufacturer Part Number 352, 354A, 354X, Cone Width 0.15 in, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Inch, Dynamic Load Capacity 15,600 lbf.

  • Bearings,V-belts & Power Transmission Equipment,Roller Bearings,Tapered Roller Bearings
  • NTN