reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Rivets,Blind Rivets
ZORO SELECT

Blind Rivet, Countersunk Head, 1/8 In Dia., 0.337 In L, Steel Body, 10000 PK

About The 1/8X.12-.18 Countersunk Steel Rivet With Steel Mandrel

1/8X.12-.18 Countersunk Steel Rivet With Steel Mandrel

Rivets,Blind Rivets

Blind Rivet, Countersunk Head, 1/8 In Dia., 0.337 In L, Steel Body, 10000 PK

Rivets,Blind Rivets

Specifications of Blind Rivet, Countersunk Head, 1/8 In Dia., 0.337 In L, Steel Body, 10000 PK

Category
Instockinstock

Last Updated

Blind Rivet, Countersunk Head, 1/8 In Dia., 0.337 In L, Steel Body, 10000 PK
More Varieties

Rating :- 9.74 /10
Votes :- 27
Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

Indentation on the workpiece is eliminated and the workpiece does not alter its position during clamping.

GN605-M16-35-AN Socket Set Screw This allows full clamping of the flat faced ball at all times. Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces..

  • Screws & Bolts,Set Screws
  • J.W. WINCO
    • GN 451 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.
  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Vibration Isolator Pads
  • J.W. WINCO
    • Swing Bolt, Stainless Steel, Matte Shot-Blasted, M10 Thrd Sz, 40 mm Thrd Lg

    Swing Bolt, Stainless Steel, Matte Shot-Blasted, M10 Thrd Sz, 40 mm Thrd Lg

    DIN 444 precision type swing bolts are mainly used for jigs and fixtures..

  • Screws & Bolts,Rod Ends
  • J.W. WINCO
    • The clamping bores of GN 145 flanged connector clamps are machined and designed for construction tubings.

    The clamping bores of GN 145 flanged connector clamps are machined and designed for construction tubings.

    .GN145-B10-2-SW Flanged Connector Clamp The clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert. GN 145 flanged connector clamps are also suitable for mounting on profile systems.

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • With the GN 125 flat adjustable tension levers, the overall height is reduced to a minimum.

    With the GN 125 flat adjustable tension levers, the overall height is reduced to a minimum.

    They are ideal wherever parts have to be clamped in a confined space or in a particular lever position.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • PU Tubing,OD 4mm,ID 2.5mm,33m/Roll,Brown

    PU Tubing,OD 4mm,ID 2.5mm,33m/Roll,Brown

    5mm,33m/Roll,Brown.PU Tubing,OD 4mm,ID 2.

  • Compressors,Air Tanks & Pneumatic Parts,Air Hoses,Pneumatic Tubing
  • SMC
    • Blind Rivet, Countersunk Head, 1/8 in Dia., 0.337 in L, Steel Body, 10000 PK
  • Rivets,Blind Rivets
  • ZORO SELECT
    • Rolling Garment Rack, bumpers & grid shelf;5”casters (2 swvl/2 brk)
  • Retail Displays & Furniture,Garment Racks
  • IRSG
    • Blind Rivet, Countersunk Head, 1/8 in Dia., 0.337 in L, Steel Body, 10000 PK
  • Rivets,Blind Rivets
  • ZORO SELECT
    • Rolling Garment Rack, bumpers & grid shelf;5”casters (2 swvl/2 brk)
  • Retail Displays & Furniture,Garment Racks
  • IRSG