Semi-Rotary Drive DFPD-1200-RP-90-RS45-F14-R3-C

Drill Bit Size Wire 34 Drill Point Angle Degrees 118 Drill Bit Material High Speed Steel Drill Bit FinishCoating Black Oxide Flute Type Spiral Flute Cutting Direction Right Hand Shank Type Straight Through Coolant No Taper length drills are designed for general purpose drilling where longer length is required Heavy duty 135Deg split point Sizes over 12 furnished with notched point.

Round Cylinder DSNU-3/8"-1"-P-A With Flexible Cushioning Rings In The End Positions. Stroke=1 ", Piston Diameter=3/8", Piston Rod Thread=6-32 Unc-2A, Based On The Standard=Iso 6432, Cushioning=P: Flexible Cushioning Rings/Plates At Both Ends.

Semi-Rotary Drive Daps-0015-090-Rs1-F0305 Single-Acting, Air Connection As Per Vdi/Vde 3845, Namur Valves Can Be Directly Flange-Mounted Size Of Actuator=0015, Flange Hole Pattern=(* F03, * F05), Swivel Angle=90 Deg, End-Position Adjustment Range At 0°=-1 - 9 Deg, End-Position Adjustment Range At 90°=81 - 91 Deg.

Multi-Socket KDVF-8 Nominal Size=4 Mm, Operating Pressure=-0,95 - 16 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [7:-:-], Note On Operating And Pilot Medium=Lubricated Operation Possible (Subsequently Required For Further Operation), Corrosion Resistance Classification Crc=2 - Moderate Corrosion Stress.

Multi-Socket KDVF-8 Nominal Size=4 Mm, Operating Pressure=-0,95 - 16 Bar, Operating Medium=Compressed Air In Accordance With Iso8573-1:2010 [7:-:-], Note On Operating And Pilot Medium=Lubricated Operation Possible (Subsequently Required For Further Operation), Corrosion Resistance Classification Crc=2 - Moderate Corrosion Stress.