HG-4061 Lock Nut, 1-1/2 In, Steel, Galvanized, Left Hand Thread

Thecomponents are made from special quenched and tempered alloy steel, a guarantee for very high strength, low weight, high wear resistance and long life.•Intelligent design: Efficient and ergonomic lifts•Multiple functions in each component: Fewer components in each sling, resulting in cost effective lifting operations•Grade 10: 25 % added strength compared to grade 8•Less weight: Up to 7% reduction in total weight•High quality: All products are proof loaded and visually inspected•Less Expensive: 37% reduction in material cost•Top fitting fulfills requirements: EN 1677:2008 (WLL 25%), ASTM A952/A952M and AS 3776:2015•End fitting fulfills requirements in: EN 1677:2008 (WLL 25%), ASTM A952/A952M-02 and AS 3776:2015 This provides a cost-effective modular system that covers a broad range of lifting applications.Double Leg 5/8 in Adjstbl Chain Slng MG2-GBK, 5ft L, 39100lb WLL Slings are double tagged for safety and all lifting components are uniformly marked with equivalent chain size, grade, manufacture's designation and name for positive identification..

JUSTRITE CS4S-G CR STOP, 4 ft , STND, GRY.

Power Team Hydraulic Cylinder, Load Return Single-Acting, Series: RL Series, 100 ton Load, 7-1/4 in Minimum Height, 9-1/4 in Maximum Height, 2 in Piston Stroke, 6-1/2 in Base Width.

A wide-variety of sizes and bridle figurations are available whether working on a small-load lift or preparing to maneuver a massively heavy element. When looking for strength and flexibility on that next big rigging job, look no further than our array of HSI Nylon Web Slings. All slings are manufactured in a certified ISO 9001: 2015 facility.

•EYE AND EYE – Is specific to a single-leg sling with flemish loop ends on either side, also known as a Wire Rope Choker.•DOUBLE TAGGED FOR SAFETY – Two tags are used on HSI slings to identify WLL (Working Load Limits).•GREATER WEAR RESISTANCE – A 6 x 25 IWRC (Independent Wire Rope Core) classification for wire rope slings offer large outer wires that provide a balance between fatigue and wear resistance.

FEIN 33657162000 Drilling And Holemaking, GEAR-WHEEL.

Crosby Lock Nut, Series: HG-4061, Measurement System: Imperial, 1-1/2 in Thread, Steel, Galvanized, Left Hand Thread, 0.

GUARDIAN 11071 PURE SAFETY GROUP DIABLO 8Ft LE CABLE SRL,.

Crosby Lock Nut, Series: HG-4061, Measurement System: Imperial, 1-1/2 in Thread, Steel, Galvanized, Left Hand Thread, 0.

GUARDIAN 11071 PURE SAFETY GROUP DIABLO 8Ft LE CABLE SRL,.