Conductive Silicone O-Ring, Dash 224, PK5

99 ft-lb/in, Friction Coefficient 0.5 in, Yellow, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 2.Cutting Board, HDPE, Grade Standard, Plastic Length 4 ft, Plastic Width 24 in, Plastic Thickness 0.22, Temperature Range -100 Degrees to 180 Degrees F, Plastic Hardness 64D.

Mntng Bkt,Adj 24 In.

3125 in, Retaining Rib Diameter Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM A582, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.005 in.01 in, Outside Diameter Tolerance +/-0.

8 in, Actual Width 0. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Rectangular, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Rigid Hose for Vacuum Fitting, 4-3/16" L, 1" Tube 25, Vacuum Rating 10-7 torr @ 72 Degrees F.

5mm Wide 89mm ID, PK5 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 89 mm, Actual Width 2. Buna-N O-Ring, 2..

7 in, Actual Width 0. Conductive Silicone O-Ring, Dash 224, PK5 Range -60 Degrees to 400 Degrees F, FDA Approved No 1.

Buna-N O-Ring, 2.

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

Buna-N O-Ring, 2. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.