Wipr Crank,1 Pin,1.38 Center-To-Center

25 in Thickness, Thickness Tolerance +/-0.125/-0.000 in, 5 in Overall Width, Width Tolerance +/-0.034 in, 1.

Rod Stock, Corrosion Resistant, Stainless Steel, Alloy Type 304, Diameter 7/8 in, Length 18 ft, Unfinished Finish, Temper Annealed, Diameter Tolerance +/-0.00 in, Typical Tensile Strength (PSI) 85000, Typical Yield Strength (PSI) 30000, Typical Hardness 75, Hardness Scale Rb, Standards AMS 5639, ASTM A276, ASTM A479.

004 in, Overall Length 24 in, Overall Width 1/2 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment Annealed, Mechanical Finish Mill, Yield Strength 60,000 psi, Tensile Strength 95,000 psi, Brinell Hardness 187, Rockwell Hardness Not Rated, Machinability 66 Percent, Standards ASTM A304, ASTM A322, ASTM A331, Appearance Cold Finished, Length Tolerance +/-2 in.4140 Alloy Steel Square Bar, Material Alloy Steel, Material Grade 4140, Thickness 0.

125 in, 0.25 in Thickness, Thickness Tolerance +/-0.045 in, Fabrication Hot Rolled, Heat Treatment Annealed, Heat Treatable Yes, Mechanical Finish Mill, Yield Strength 34,800 psi, Tensile Strength 79,800 psi, 149 Brinell Hardness, 80 Rockwell Hardness, Includes Material Certificate Yes, Standards ASTM A240, Maximum Temperature 1,700 Degrees F.000 in, 2 in Overall Width, Width Tolerance +/-0.

125/-0 in, 1 in Overall Width, Width Tolerance +/-0.25 in Thickness, Thickness Tolerance +/-0.002 in, Fabrication Hot Rolled, Heat Treatment Annealed, Heat Treatable Yes, Mechanical Finish Mill, Yield Strength 30,000 psi, Tensile Strength Not Rated, 131 Brinell Hardness, 74 Rockwell Hardness, Includes Material Certificate Yes, Standards AMS 5639, ASTM A276, ASTM A479.004 in, 0.

024 in, 0.

31 in, Thickness Tolerance -0.1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.

Center-To-Center.Wipr Crank,1" Pin,1.38 In.38" Center-To-Center Pin,1.

003 in, Overall Length 24 in, Overall Width 3 1/2 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Yield Strength 54,000 psi, Tensile Strength 80,000 psi, Brinell Hardness 70, Rockwell Hardness Not Rated, Machinability 78 Percent, Standards ASTM A108, ASTM A29, Appearance Unpolished, Length Tolerance +/-2 in.31 in, Thickness Tolerance -0.1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.

Center-To-Center.38 In.38" Center-To-Center Pin,1.Wipr Crank,1" Pin,1.