SoFt Silicone O-Ring, Dash 217, PK10

Pressure 1,000 psi CWP, Max. Range 0 Degrees to 350 Degrees F, Ball Material 201 Stainless Steel, Seat Material PTFE, Stem Type Blowout Proof, Handle Type Lever, Handle Material 304 Stainless Steel, Stem Material 304 Stainless Steel, Body Seal Material PTFE, Hose I.D. Ball Valve,316 Stainless Steel,Straight 1 1/2 in.

Gasket.

071 in, Drive Size #1, Tensile Strength 70,000 psi, Dimensional Standards ASME B18.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width Not Applicable.6.

Soft Buna-N Cord Stock.

5 mm, Color Brown, Durometer 75 Shore A, Nominal Outside Dia.. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

6 mm, Actual Width 2.4 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia.6 mm, Nominal Width 2.

315 mm, Nominal Width 5 mm, Actual Inside Dia. Buna-N O-Ring, 5mm Wide 315mm ID Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 315 mm, Actual Width 5 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia..325 mm, Temp.

SoFt Silicone O-Ring, Dash 217, PK10 Range -80 Degrees to 450 Degrees F, FDA Approved Yes 1.. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

325 mm, Temp.. 315 mm, Nominal Width 5 mm, Actual Inside Dia.

1 3/16 in, Nominal Width 1/8 in, Actual Inside Dia.1.