Spiral Flute Tap , M6x1.00 , Modified Bottom, Semi-Bottom , 3 Flutes,

-24, UNF, Overall Length 2 23/32 in, Cobalt, TiN, Right Hand, Thread Length 11/16 in, 75 Percent Thread Drill Size I, Thread Limit H10, Class of Fit H3, Number of Flutes 3.Spiral Point Tap, Thread Size 5/16 In.

1890, Wire, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 3.Jobber Length Drill Bit, Drill Bit Size #12, Drill Bit Point Angle 140 Degrees , Carbide, WD1, Decimal Equivalent 0.

-16, UNC, Overall Length 2 15/16 in, Cobalt, TiN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H9.Thread Forming Tap, Thread Size 3/8 In.

Carbide Bur,60 deg. Cone,5/8 in.

50 mm, Drill Bit Point Angle 140 Degrees , Carbide, EgiAs, Decimal Equivalent 0.Jobber Length Drill Bit, Drill Bit Size 14.5709, Metric, Drill Bit Point Type R Thinning Point, Non-Coolant Through.

, Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.Corner Radius End Mill, 1/2 in Milling Dia.

00 mm, Powdered Metal, TiCN, Thread Length 7.

60 mm, Drill Bit Point Angle 120 Degrees , R Thinning Point, Cobalt, WXL, Material Grade - Machining General Purpose, Maximum Drilling Depth 38.

00, Thread Limit D5, Thread Direction Right Hand, Number of Flutes 3.00 mm, 75 Percent Thread Drill Size 5.00 mm, Powdered Metal, TiCN, Thread Length 7.Spiral Flute Tap, Thread Size M6x1, Metric Coarse, Overall Length 80.

60 mm, Drill Bit Point Angle 120 Degrees , R Thinning Point, Cobalt, WXL, Material Grade - Machining General Purpose, Maximum Drilling Depth 38.