STEM ADAPTOR 6MM X 1/4'' BSPP B IMATERIAL SEAL

UNGER RG400 ErgoTec Soft Squeegee Rubber Gross 16 Inch, 144PK.

In addition to that, Parker recommends the use of seamless cold drawn stainless steel tubes and pipes according to DIN EN 10216-5, ASTM A269/A213 and ASTM A312.0 CR VI-FREE E235+N Markets: - Automotive -Defence -Energy -Environment -Industrial -Infrastructure -Machine Tools -Materials Handling -Mobile -Oil and Gas -Power Generation -Process -Transportation -Water Applications: - Suitable for general hydraulic applications. This opens into reliability and longevity of the hydraulic application.E 355N St.

Check crimpsource for the most up-to-date die and crimping recommendations. FEMALE PIPE SWVL STEEL FITTING http://www.parker.

Markets: Water Filtration Beverage Dispensing Bottling Semi-conductor Chemical Features/Benefits: Built in LIQUIfit, TrueSeal and Par-Barb connections eliminates the need for a secondary fitting Low-profile design allows for easy assembly and access where space is limited Bi-directional flow foe maximum productivity Meets FDA and NSF-51 requirements for food contact Wide chemical acceptance range EPDM seals Push-to-Connect and barbed connections Applications: Water Beverages Food Pneumatic circuits Custom configurations and sizes are available upon request. The compact design allows for easy assembly and access where space is at a premium.

The hose is qualified with permanent crimp couplings for a safe and secure connection and is a versatile hose for many common industrial applications. - The user must determine if the hose is suitable for applications subject to electrical hazard. - Do not use in dry air applications typically, air systems that do not expose the tube of the hose to lubricating oil mist from the compressor.Refer to NAHAD Industrial Hose Assembly Guidelines.

.

STEM ADAPTOR 6MM X 1/4'' BSPP B IMATERIAL SEAL Features/Benefits: Perfect for brass compression fittings adaptation to the installation Quick and simple to install Compatible with the Parker Legris range of brass compression fittings Mechanical properties proven for use in industrial robotic installations Markets: Packaging Miscellaneous Manufacturing Vehicle Assembly Facilities Machine Tools Applications: Pneumatic Machinery Equipment at Medium and High Pressure Lubrication Systems Cooling Systems Welding Robots Suitable for Vacuum Applications Technologies: Brass fittings for optimum installation adaptation Technical Characteristics: Fluids: Coolants, compressed air Materials: brass, engineering polymer, silicone free Pressure: 0 to 20 bar 250 bar for the the 0220 product type Temperature: -60°C to +250°C With metallic tube and without polymer seals Regulations: DI: 2002/95/EC RoHS, 2011/65/EC DI: 97/23/EC PED RG: 1907/2006 REACH Product Types: Barb Connector for Hose Barb Connector for Flexible Tubing Plug for Compression Fitting Tube End Plug for Compression Fitting Hex Head Plug with Captive Sealing Washer, Male BSPP and Metric Thread Hex Head Plug with Bi-Material Seal, Male BSPP Thread Stud Standpipe, Male BSPT Thread Sleeve Nut for Compression Fitting, Male Metric Thread Stud Standpipe with Bi-Material Seal, Male BSPP Thread Straight Male Orientable Adaptor, with Bi-Material Seal, Male BSPP Thread Reducer, with Bi-Material Seal, Male BSPP Thread/Female BSPP and Metric Thread Tube Support / ferrule for Polymer Tubing.

Features/Benefits: - Large Range & Flexibility - Large selection of materials for excellent chemical compatibility: brass, steel, stainless steel, aluminium - Surface treatment for increased corrosion resistance: nickel-plated brass or anodised aluminium - Stainless steel for corrosive environments - BSPP, BSPT, NPT and metric threads - Performance - Robust design - Suitable for low to high pressure, depending on configuration and material - Forged shapes for mechanical strength Markets: - Factory Automation - Miscellaneous manufacturing - Packaging - Vehicle Assembly Facilities - Wearing Apparel - Food and Beverage Applications: - Suitable for Corrosive and Non Corrosive Environments - Suitable for High and Medium Pressure Technologies: - Bulkhead connector - Equal tee - Manifold block - Fitting system - Pneumatic fittings - Brass adaptor - Stainless steel adaptors - Brass connectors Technical Characteristics: - Materials: Adaptors and Plugs: Brass, nickel-plated brass, stainless steel 316L, steel Manifolds: Anodised aluminium - Pressure: Adaptors and Plugs: Brass: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Nickel-plated brass: 60 bar Stainless steel 316L: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Steel: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Manifolds: Anodised aluminium: 20 bar - Temperature: Adaptors and Plugs: Brass: -40 DegC to +150 DegC without sealing washer; -20 DegC to +80 DegC with sealing washer Nickel-plated brass: -10 DegC to +80 DegC Stainless steel 316L: -20 DegC to +180 DegC Steel: -10 DegC to +80 DegC.ADAPTOR DOUBLE FEMALE 1/8'' - 3 /8'' BSPP NICKEL This range of products provides the user with a complete solution covering numerous applications, both in non-corrosive and corrosive environments.

STEM ADAPTOR 6MM X 1/4'' BSPP B IMATERIAL SEAL Features/Benefits: Perfect for brass compression fittings adaptation to the installation Quick and simple to install Compatible with the Parker Legris range of brass compression fittings Mechanical properties proven for use in industrial robotic installations Markets: Packaging Miscellaneous Manufacturing Vehicle Assembly Facilities Machine Tools Applications: Pneumatic Machinery Equipment at Medium and High Pressure Lubrication Systems Cooling Systems Welding Robots Suitable for Vacuum Applications Technologies: Brass fittings for optimum installation adaptation Technical Characteristics: Fluids: Coolants, compressed air Materials: brass, engineering polymer, silicone free Pressure: 0 to 20 bar 250 bar for the the 0220 product type Temperature: -60°C to +250°C With metallic tube and without polymer seals Regulations: DI: 2002/95/EC RoHS, 2011/65/EC DI: 97/23/EC PED RG: 1907/2006 REACH Product Types: Barb Connector for Hose Barb Connector for Flexible Tubing Plug for Compression Fitting Tube End Plug for Compression Fitting Hex Head Plug with Captive Sealing Washer, Male BSPP and Metric Thread Hex Head Plug with Bi-Material Seal, Male BSPP Thread Stud Standpipe, Male BSPT Thread Sleeve Nut for Compression Fitting, Male Metric Thread Stud Standpipe with Bi-Material Seal, Male BSPP Thread Straight Male Orientable Adaptor, with Bi-Material Seal, Male BSPP Thread Reducer, with Bi-Material Seal, Male BSPP Thread/Female BSPP and Metric Thread Tube Support / ferrule for Polymer Tubing.

Features/Benefits: - Large Range & Flexibility - Large selection of materials for excellent chemical compatibility: brass, steel, stainless steel, aluminium - Surface treatment for increased corrosion resistance: nickel-plated brass or anodised aluminium - Stainless steel for corrosive environments - BSPP, BSPT, NPT and metric threads - Performance - Robust design - Suitable for low to high pressure, depending on configuration and material - Forged shapes for mechanical strength Markets: - Factory Automation - Miscellaneous manufacturing - Packaging - Vehicle Assembly Facilities - Wearing Apparel - Food and Beverage Applications: - Suitable for Corrosive and Non Corrosive Environments - Suitable for High and Medium Pressure Technologies: - Bulkhead connector - Equal tee - Manifold block - Fitting system - Pneumatic fittings - Brass adaptor - Stainless steel adaptors - Brass connectors Technical Characteristics: - Materials: Adaptors and Plugs: Brass, nickel-plated brass, stainless steel 316L, steel Manifolds: Anodised aluminium - Pressure: Adaptors and Plugs: Brass: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Nickel-plated brass: 60 bar Stainless steel 316L: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Steel: 1/8'' to 1/2'': 200 bar; 3/4'' and 1'': 150 bar; 11/4'' to 2'': 100 bar, without sealing washer Manifolds: Anodised aluminium: 20 bar - Temperature: Adaptors and Plugs: Brass: -40 DegC to +150 DegC without sealing washer; -20 DegC to +80 DegC with sealing washer Nickel-plated brass: -10 DegC to +80 DegC Stainless steel 316L: -20 DegC to +180 DegC Steel: -10 DegC to +80 DegC.ADAPTOR DOUBLE FEMALE 1/8'' - 3 /8'' BSPP NICKEL This range of products provides the user with a complete solution covering numerous applications, both in non-corrosive and corrosive environments.