Force Gauge, 0 To 10 KN

The force gauge offers the option of storing two limit values, which are continuously compared with the instantaneous value. When exceeding or falling below these limits, a signal in the display of the force gauge, as well as a reaction via external interfaces, which can be used for example for the control of a testing machine. The force gauge with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. 3 m length and thanks to the small cell dimensions it ensures a versatile application. The PEAK Hold function allows freezing of the highest measured value in the force gauge until this value is exceeded or cleared. The sampled measured values ​​are displayed as an instantaneous value, as well as in a graph trace directly in the force gauge. The force gauge or the load cell has on the bottom of several threaded holes that allow a firm installation.The force gauge can operate at a sampling rate of up to 1600 Hz. The measurements can be stored in the internal memory or transmitted via USB interface with the included software with a maximum of 800 Hz as a live measurement. The pressure cell is connected to the force gauge by a sensor cable of approx.

Test & Measurement Products,Force Gauges

Force Gauge, 0 To 10 KN