CAMROL CF Series Cylindrical OD Cam Follower With LUBRI-DISC Seal, 2 In X 1-1/4 In W Roller

Sturdy due to short flutes. Solid Carbide NC Spotting Drill, 4 mm, 90 Deg, Spiral Flutes, Uncoated Exactly central ground point. Application: Point angle 90 degrees for spot drilling and countersinking in one operation when a drill of smaller dia is used afterwards. Through-coolant: no Shank: DIN 6535 HA to h6 Flute length Lc: 10 mm Overall length L: 40 mm Shank dia Ds: 4 mm Feed f in steel Easy spot drilling and high shape accuracy of the center hole.

Blade of chrome vanadium special alloy combining maximum hardness and exceptional toughness.2 mm Blade length: 100 mm overall length: 205 mm Hexagon collar for wrench assistance: 10 mm The special surface structure allows transmission of high torques- even with wet or oily hands.

Application: For repair and assembly work- for loosening tight screws etc. Versatile- robust screwdriver with taper blade..2 mm Blade length: 160 mm overall length: 270 mm Hexagon collar for wrench assistance: 10 mm - Marked with drive symbol and size.

Cutting chamfer: without bevel Head width: 10 mm Cutter length: 10 mm Cutting capacity copper wire up to : 0.

Wrench length: 210 mm.Single ended ring wrench fully insulated- Width across flats: 14mm Material: Chrome vanadium steel.

75 x 70 Metric 8.8 Coarse Hex Head Cap.TITAN INDUSTRIAL SUPPLY TM1270Z88 M12-1.

CAMROL CF Series Cylindrical OD Cam Follower With LUBRI-DISC Seal, 2 in Dia x 1-1/4 in W Roller, 7/8 in Dia x 2 in L Stud, Chrome Steel Roller.

0472 in OD, 1 Rows, 1-7/16 in W, 2801 lb Dynamic/1651 lb Static Load.ER-T Non-Expansion Standard-Duty Straight Bore Ball Bearing Insert With Snap Ring, 1 in Dia Bore, 2.

CAMROL CF Series Cylindrical OD Cam Follower With LUBRI-DISC Seal, 2 in Dia x 1-1/4 in W Roller, 7/8 in Dia x 2 in L Stud, Chrome Steel Roller.

0472 in OD, 1 Rows, 1-7/16 in W, 2801 lb Dynamic/1651 lb Static Load.