Retaining Ring

Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 6 in, Head Type Flat, Drive Type Torx, Material Steel, Finish Climaseal, Material Grade/Class 1022, Compatible Material Block, Brick, Concrete, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Ultimate Shear Strength 1,440 lb, Maximum Ultimate Tension Strength 950 lb, Minimum Installation Depth 1 in, Manufacturer Location Globally Sourced, Body Length 6 in, Package Quantity 100.

Wedge Anchor, System of Measurement Inch, Anchor Diameter 5/8 in, Thread Size 5/8 In.-11, Overall Length 3 1/2 in, Thread Length 1 3/4 in, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Compatible Material Concrete, Drill Bit Size 5/8 in, Minimum Installation Depth 2 1/2 in, Minimum Material Thickness 5 in, Ultimate Shear Strength (4,000 psi Concrete) 13,720 lb, Ultimate Tension Strength (4,000 psi Concrete) 13,720 lb, Wedge Anchor Type Wedge Anchor, Seismic Approved No.

Tactical Glove, S, Green, Closed Cuff, Synthetic Leather and Foam Padding Palm Material, Stretch Polyester, Neoprene Back Material, Thermoplastic Rubber Knuckle Padding Material, Hook-and-Loop Closure Type, Full Finger Finger Style, 1 Pair.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Palm Style Single Layer, Backing Style Polyester with Neoprene Rubber Knuckle Protection, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Polyester, Glove Back Color Beige, Glove Construction Cut and Sewn, Knuckle Protection Material Neoprene, Standards EN, Touchscreen Compatible No, 1 Pair.

Mechanics Gloves, Palm Material Synthetic Leather, 1 Pair.

Wire Shelf, Color Silver, Chrome Finish, Material Steel, Mounting Hardware Required Yes, Mounting Location Bottom, Middle; Top, Number of Shelves 1, Overall Depth 24 in, Overall Width 60 in, Shelf Adjustment Type Split Sleeve, Shelf Depth 24 in, Shelf Width 60 in, Load Capacity 600 lb, Lip Type Stationary, Lip Height 1/4 in, Includes Mounting Hardware Yes, Includes (4) Pairs of Split Sleeves, Yes NSF Certified, Dry, ISO 9001-9002 Standards.

Retaining Ring, Series Not Applicable, Compatible with Grainger Part Number 13E913, Product Type Recommended Retaining Ring, Compatible with Manufacturer Part Number E610H, E63H, E67H, Compatible with Series Not Applicable, Compatible with Brand Ingersoll Rand.

8 A, Frequency 60 Hz, Electrical Connection Wire Leads, Motor Type Shaded Pole, Motor Insulation Class B, Maximum Fan Speed 3,400 RPM, Maximum Motor Speed 3,400 RPM, Maximum Inlet Air Temperature 40 Degrees C.

Retaining Ring, Series Not Applicable, Compatible with Grainger Part Number 13E913, Product Type Recommended Retaining Ring, Compatible with Manufacturer Part Number E610H, E63H, E67H, Compatible with Series Not Applicable, Compatible with Brand Ingersoll Rand.

8 A, Frequency 60 Hz, Electrical Connection Wire Leads, Motor Type Shaded Pole, Motor Insulation Class B, Maximum Fan Speed 3,400 RPM, Maximum Motor Speed 3,400 RPM, Maximum Inlet Air Temperature 40 Degrees C.Draft Inducer, Application Furnaces, For Appliance Type Furnaces, Inlet Diameter 2 in, Outlet Diameter 1 5/8 in, Compatible with Brand Lennox, Replacement For Manufacturer Model Number 45037-001, 702110602, 702111106, 702111174, Nameplate Voltage 115V AC, Phase 1, Current 1.