Solenoid Valve VUVS-LT20-M32U-MD-N18-F7

Motor Cable Nebm-H6G4-E-7.5-Q13N-Le4 Cable Identification=Without Inscription Label Holder, Electrical Connection 1, Function=Field Device Side, Electrical Connection 1, Design=Angular, Electrical Connection 1, Connection Type=Plug Socket, Electrical Connection 1, Cable Outlet=Straight.

Push-In Fitting QS-V0-1/2-10 Size=Standard, Nominal Size=9 Mm, Material Fire Test=(* Ul94 V-0 (Housing), * Ul94 V-0 (Releasing Ring)), Type Of Seal On Screw-In Stud=Coating, Design Structure=Push/Pull Principle.

Standards-Based Cylinder Dsbc-80-150-Ppsa-N3 With Self-Adjusting Pneumatic End Position Cushioning Stroke=150 Mm, Piston Diameter=80 Mm, Piston Rod Thread=M20X1,5, Cushioning=Pps: Self-Adjusting Pneumatic End-Position Cushioning, Assembly Position=Any.

Solenoid Valve MFH-5-1/8-L-S-B-EX Solenoid Coil And Socket Should Be Ordered Separately. Valve Function=5/2 Monostable, Type Of Actuation=Electrical, Width=26 Mm, Standard Nominal Flow Rate=1000 L/Min, Operating Pressure=-0,9 - 10 Bar.

Pressure Regulator LRS-3/8-D-O-MIDI Size=Midi, Series=D, Actuator Lock=Rotary Knob With Integrated Lock, Assembly Position=Any, Design Structure=Directly-Controlled Diaphragm Regulator.

Manifold Sub-Base Vabv-S4-2Hs-G18-Cb-2T1 Width=38 Mm, Ce Mark (See Declaration Of Conformity)=To Eu Directive Low-Voltage Devices, Corrosion Resistance Classification Crc=0 - No Corrosion Stress, Product Weight=434 G, Pneumatic Connection, Port 2=G1/8.

Solenoid Valve Vuvs-Lt20-M32U-Md-N18-F7 Valve Function=3/2 Open, Monostable, Type Of Actuation=Electrical, Valve Size=21 Mm, Standard Nominal Flow Rate=600 L/Min, Operating Pressure=2,5 - 10 Bar.

Push-In Fitting Npqh-D-G18-Q8-P10 Size=Standard, Nominal Size=6 Mm, Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Container Size=10.

Solenoid Valve Vuvs-Lt20-M32U-Md-N18-F7 Valve Function=3/2 Open, Monostable, Type Of Actuation=Electrical, Valve Size=21 Mm, Standard Nominal Flow Rate=600 L/Min, Operating Pressure=2,5 - 10 Bar.

Push-In Fitting Npqh-D-G18-Q8-P10 Size=Standard, Nominal Size=6 Mm, Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Container Size=10.