Motor, 1/30 HP, OEM Replacement Brand: Trane Replacement For: DE3E152

Stretch Wrap Category General Purpose Stretch Wrap with Handle, Stretch Wrap Style Cast, Stretch Wrap Application Standard Duty, Overall Width 3 in, Overall Length 1,000 ft, Gauge 80 ga, Stretch Wrap Handle Type Reusable Handle, Stretch Wrap Film Grade Hand Grade, Mil Thickness 0.8 mil, Sheets Per Roll Continuous Roll, Package Quantity 4.

Leather Gloves, Hand Protection Style Glove, Additional Hazard Protection None, Leather Glove Style Drivers, ANSI/ISEA Impact Level Not Tested, ANSI/ISEA Cut Level A1, Finger Coverage Full Finger, Stitching Material Kevlar(R), Insulated Yes, Sold As Pair, Leather Coverage Style Leather Palm, Standards EN 388, Glove Length 11 13/16 in, Glove Hand Style Left and Right, Thumb Style Wing, Glove Insulation Material HeatKeep(R), Cuff Style Knit, Glove Liner Material Polyester, Leather Grade Standard.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Cut-Resistance Coverage Palm Side, Palm Style Single Layer, Backing Style Polyester with Neoprene Rubber Knuckle Protection, Cuff Style Hook-and-Loop, Insulated No, Palm Material Synthetic Leather, Silicone-Free No, Glove Liner Material Unlined, Glove Back Material Polyester, Glove Back Color Black, Glove Construction Cut and Sewn, Knuckle Protection Material Neoprene, Standards EN, ANSI/ISEA Cut Level A2.

.1/8" FNPT Stainless Steel Mini Ball Valve Inline Range -20 Degrees to 370 Degrees F, Ball Material 316 Stainless Steel, Seat Material PTFE, Stem Type Blowout Proof, Handle Type Wedge, Handle Material Zinc Cast, Stem Material 316 Stainless Steel Pressure 1,000 psi CWP, Max.

2 ft-lb/lb, Max.Impact Wrench, Power Source Air Powered, Air Consumption 60 cfm, Air Inlet 3/8 in NPT, Air Pressure 90 psi, Max.

3 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins.

of Speeds 3, Voltage 115V AC, Full Load Amps 0. Ambient Temp. Motor, 1/30 HP, OEM Replacement Brand: Trane Replacement For: DE3E152 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CCWSE, Motor Enclosure Design Open Air-Over, Motor Mounting Type Cradle Base.5 A, 42 Frame, OEM Replacement Brand Trane, Replacement For DE3E152, Usable @ 208V No, Usable @ 200V No, 60 Hz, Motor Service Factor 1, Motor Thermal Protection Impedance, Ins.

Cable Cutter, Cutter Type General Purpose Cable Cutter, Cutting Action Shear, Features Locking Tab Keeps Spring in Place, Spring-Loaded Automatic Opening, For Maximum Diameter Hard Steel Not Applicable, For Maximum Diameter Stainless Steel Not Applicable, For Maximum Diameter ACSR Conductor Not Applicable, For Maximum Diameter Medium Steel Not Applicable, For Maximum Diameter Soft Steel Not Applicable, For Maximum Wire Thickness 1/2 in (Stranded Wire), 10 AWG (Solid Wire).

Direct Drive Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/30 HP, Nameplate RPM 1,075, No.

Cable Cutter, Cutter Type General Purpose Cable Cutter, Cutting Action Shear, Features Locking Tab Keeps Spring in Place, Spring-Loaded Automatic Opening, For Maximum Diameter Hard Steel Not Applicable, For Maximum Diameter Stainless Steel Not Applicable, For Maximum Diameter ACSR Conductor Not Applicable, For Maximum Diameter Medium Steel Not Applicable, For Maximum Diameter Soft Steel Not Applicable, For Maximum Wire Thickness 1/2 in (Stranded Wire), 10 AWG (Solid Wire).