#8-32 X 3/8 In Phillips Round Machine Screw, Zinc Plated Steel, 100 PK

Spring Pin, System of Measurement Inch, Pin Diameter 5/64 in, Pin Type Slotted, Material Steel, Material Grade/Class Ungraded, Finish Plain, Usable Length 1 1/8 in, End Type Chamfered, Chamfer Diameter 0.2, Shank Length Tolerance +/-0.018 in, Fits Minimum Hole Diameter 5/64 in, Fits Maximum Hole Diameter 5/64 in, Shank Length 1 1/8 in, Maximum Chamfer Length 0.032 in, Minimum Chamfer Length 0.

Not Graded, 1"-8 Hex Head Cap Screw, Plain 18-8 Stainless Steel, 7-1/2 in L Thread Length 2 1/4 in, Head Height 39/64 in, Head Width 1 1/2 in.

,PK2 Range -15 Degrees to 400 Degrees F, FDA Approved No, Package Quantity 2 4. O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

125 in, Color Silver, Dimensional Standards ASME B18.550 in.125 in, Minimum Thickness 0.55 in, Maximum Thickness 0.

Eye Bolt, Eye Inside Diameter 1/2 in, Eye Outside Diameter 1 in, Eye Thickness 1/4 in, Hot Dipped Galvanized, Steel, Hole Center-to-End Length 4 1/2 in, Shank Diameter 1/4 in, Thread Style Partially Threaded, UNC, Thread Direction Right Hand, Thread Length 1 1/2 in, Thread Size 1/4 In.-20, Shank Length 3 in, Externally Threaded, Shoulder Style Without Shoulder, System of Measurement Inch, Rod End, Overall Length 4 in, Screw Size 1/4 in, Pack Size Small Pack.

O-Ring,Dash 385,Viton,0.

12 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.12 in.285 in, Maximum Head Height 0.

25 Hex Head Cap Screw, Black Oxide Steel, 35 mm L, 100 PK Thread Length 35 mm, Head Height 5.Class 10.3 mm, Head Width 13 mm, Package Quantity 100.

285 in, Maximum Head Height 0.312 in, Minimum Head Width 0.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 0.Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size #8-32, Fastener Length 3/8 in, Head Width 0.

3 mm, Head Width 13 mm, Package Quantity 100.9, M8-1.25 Hex Head Cap Screw, Black Oxide Steel, 35 mm L, 100 PK Thread Length 35 mm, Head Height 5.Class 10.