O-Ring,Dash 279,Buna N,0.13 In.,PK5

102 in, Minimum Head Height Not Applicable, Minimum Point Diameter 0.19 in, Dimensional Standards ASME B18.3, Head Height Not Applicable, Maximum Head Height Not Applicable, Maximum Point Diameter 0.088 in, Package Quantity 100.

3.004 in, Pack Size Small Pack, Head Height 3/16 in, Head Diameter 3/8 in, Dimensional Standards ASME B18.

O-Ring,Silicone,2-5/8,2.2.139 in, Dash Number 231, Color Red, Durometer 70 Shore A, Meets/Exceeds ASTM D2000 -VQM 70, FDA 21 CFR 177.

-18, Fastener Length 2 in, Head Width 0.

Grade 8, 5/8"-11 Hex Head Cap Screw, Zinc & Yellow Plated Steel, 4 in L, 5 PK Thread Length 1 1/2 in, Head Height 25/64 in, Head Width 15/16 in, Package Quantity 5.

156 in, Product Type Blind Rivet, Body Material Aluminum, Finish Plain, Head Type Dome, Head Diameter 5/16 in, Head Angle 90 Degrees , Shear Strength 190 lb, Tensile Strength 230 lb, Maximum Hole Diameter 0.

,PK5 Range -40 Degrees to 250 Degrees F, FDA Approved No, Package Quantity 5 12.139 in, Dash Number 279, Color Black, Durometer 70 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.984 in, Actual Width 0.13.

2./Thread Size 3/4 In.Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Plain, Dia.1, Head Type Hex, Head Height 1/2 in, Head Width 1 1/8 in, Package Quantity 5.

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 13 in, Nominal Width 1/8 in, Actual Inside Dia.13.139 in, Dash Number 279, Color Black, Durometer 70 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.

2./Thread Size 3/4 In.Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 5, Fastener Finish Plain, Dia.