Saw Wheel

The nut is torqued properly and then, if the slot isn't aligned with the hole in the fastener, the nut is rotated to the nearest slot. The bolt or axle has one or two holes drilled through its threaded end.3/8"-24 Zinc Plated Steel Fine Thread Castle Hex Nuts 1 12PK The nut is then secured with a cotter pin or safety wire..

CHANNELLOCK CL440X SPEEDGRIP 12" TONGUE & GROOVE.

S & H INDUSTRIES KE77138 ADAPTER 1/2-13X7/16-20.

CHANNELLOCK CL148-10 NIPPERS 10" END CUTTING.

;Us Range Oven Series: 836 Cuisine, 900 Phoenix,;Performer Ii Convection Oven.;Vc(4,6) Series: 90, Et.

;Comstock Castle;Southbend Griddle Hdg, Mdg;Star Broiler/Griddle 255, 257, 615, 624, 636, 648..Burner Valve Orifice, # 55, Lp Hood Orifice, 3/8"-27 X #55;;Burner Orifice, #55, 3/8"-27, 1/2" Long.

Hobart 5700, 5701, 5801.

3 Position Toggle Switch;20A-125V, 10A-277V, On-(On)-On, Dpdt(Ctr-On),;6 Tabs, Toggle Switch, When Toggled;Left Or Right Both Poles Function As Normal, ;But In The Center Position The Center And End ;Terminal On One Side (One Pole) Is Closed And;The Center And The End Terminal On The; Other Side (One Pole) Is Also Closed;Globe Slicer 2500, 3500, 3750, 3875V, 3600, 4500, 4750,;4875V.

Hobart 5700, 5701, 5801.

3 Position Toggle Switch;20A-125V, 10A-277V, On-(On)-On, Dpdt(Ctr-On),;6 Tabs, Toggle Switch, When Toggled;Left Or Right Both Poles Function As Normal, ;But In The Center Position The Center And End ;Terminal On One Side (One Pole) Is Closed And;The Center And The End Terminal On The; Other Side (One Pole) Is Also Closed;Globe Slicer 2500, 3500, 3750, 3875V, 3600, 4500, 4750,;4875V.