reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Marine & Watersport,Propellers,Shafts & Accessories
SOLAS

Interchangeable Hub Kit For Rubex Propeller, Application: Suzuki; 15 Tooth Spline 4-1/4in Gearcase

About The SEE RBX APPLICATION CHART OR VISIT WWW. One piece construction. Hub will not spin in propeller

Type: D-Series. Gearcase; Aluminum Hub. For Solas Dual Prop and B3 installations, front and rear propellers must both be manufactured by Solas. Rubber construction. Reusable if propeller is damaged. One piece construction. Disclaimer: Pitch estimates and propeller selections made by this prop finder are provided only as a general reference and may not be correct for specific boats under actual boating conditions. All necessary hardware included. Anodized aluminum splines some available in bronze. Type: D-Series; Application: Suzuki; 15 tooth spline 4-1/4 in. no plastics to deteriorate. RUBEXPROPS. Also, they must be made of the same material: either aluminum or stainless steel but not both. 10-Degree deflection to reduce banging when shifting gears or hitting a submerged object. COM TO MATCH TO ENGINE/DRIVE. Special tools may be required to install Dual Props. 15 in. Hub will not spin in propeller. SEE RBX APPLICATION CHART OR VISIT WWW. Interchangeable with Mercury Flo-Torque and Michigan Vortex propellers. Spline Tooth . Please consult OEM manual for proper installation and torque specs. Gearcase. By using this prop finder, you agree that the Solas Science and Engineering Company, Ltd, its dealers and other host entities do not accept any liability and are not responsible for harm to persons or property, damages or costs caused by the installation, handling or use of an indicated propeller or hardware. Seats to propeller hub cavity to eliminate hub chatter and vibration. Application: Suzuki; 15 tooth spline 4-1/4 in.

Marine & Watersport,Propellers,Shafts & Accessories

Interchangeable Hub Kit For Rubex Propeller, Application: Suzuki; 15 Tooth Spline 4-1/4in Gearcase

Marine & Watersport,Propellers,Shafts & Accessories

Specifications of Interchangeable Hub Kit For Rubex Propeller, Application: Suzuki; 15 Tooth Spline 4-1/4in Gearcase

Category
Instockinstock

Last Updated

Interchangeable Hub Kit For Rubex Propeller, Application: Suzuki; 15 Tooth Spline 4-1/4in Gearcase
More Varieties

Rating :- 9.33 /10
Votes :- 27
GN 798.5 stepped retractable handles are noted for their modern design, and the stepped shape provides the operator with a better grip.

GN 798.5 stepped retractable handles are noted for their modern design, and the stepped shape provides the operator with a better grip.

The handle is pulled out of its taper seating in the direction of the arrow and then tilted.5-KT-24 Retractable Handle A compression spring locks the handle in both end positions. Retractable handles are suitable when the handle must be withdrawn during automatic operations..

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Levers & Handles
  • J.W. WINCO
    • GN 616 spring plungers are used as locating devices, detent pins, pressure pins and ejectors.

    GN 616 spring plungers are used as locating devices, detent pins, pressure pins and ejectors.

    GN616-M8-SN Spring Plunger-Stainless A typical example is push-on / push-off applications..

  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • GN 43 leveling feet are intended for use in aggressive environments.

    GN 43 leveling feet are intended for use in aggressive environments.

    JW Winco GN43-80-1/2X13-150-D0-S Leveling Feet The wide range of possible combinations of the base and the stud / socket versions make these leveling feet universally applicable..

  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • In order to bring the handle into the operating position it must be pulled upward 90° against the torsion spring, to a stop, and then pushed axially against the spring pressure into its hold position.

    In order to bring the handle into the operating position it must be pulled upward 90° against the torsion spring, to a stop, and then pushed axially against the spring pressure into its hold position.

    By maintaining the forward thrust on the handle, the handwheel can easily be rotated.GN 924.7-160-B14-R-SR Spoked Handwheel When the handle is released, the spring returns it back to the retracted position.

  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Handwheels
  • J.W. WINCO
    • In order to bring the handle into the operating position it must be pulled upward 90° against the torsion spring, to a stop, and then pushed axially against the spring pressure into its hold position.
  • Workholding & Machine Tool Accessories,Hand Knobs and Wheels,Handwheels
  • J.W. WINCO