30 Ft Tape Measure, 1 In Blade

8 gpm, Frequency 60 Hz.5 A, Coil Type Header, Connection Size 1 1/2 in, Connection Type Threaded Female NPT, Fan Diameter 18 in, Fan Guard Type OSHA Compliant Guard, Flow Rate 8.Product Type Suspended Horizontal Hydronic Wall & Ceiling Unit Heater, Air Flow Direction Horizontal, Heating Method Steam, Water, Output @ 2 PSI Steam 120,000 BtuH, Output @ 200 F Water 87,100 BtuH, Air Flow 1,900 cfm, Fan Phase 1, Overall Height 25 1/4 in, Overall Width 20 7/8 in, Overall Depth 13 in, Amperage 4.

Pipe Mounting System, Product Type Pipe Mounting System, Compatible Pipe Diameter 2 in, Includes Pre-Curved Cover Clamp, Pre-Curved Hang Clamp, (2) Locknuts.

Socket Bit, Insert Length 1 in, Replaceable Insert No, SAE, Tip Size 1/16 in, Tip Style Hex, Overall Length 1 7/8 in, Drive Size 1/4 in, Socket Depth Standard, Alloy Steel.

. This Proto J1364 Soft Face Hammer is a great tool for striking applications where the head may be subject to repeated impacts. Soft Face Hammer - Medium/Tough Tips 1-11/16" This Proto Soft Face Hammer is an essential tool for every job that requires you to strike parts or components with your hand.

110-2012, SAE AS954G.

, and a blade width of 18 mm. Snap-Off Utility Knife, Retractable, Snap-Off, General Purpose, ABS The Stanley 10-151 Snap-Off Utility Knife is a must have for your toolbox. This utility knife has an overall length of 6 1/2 in. The snap-off blade allows you to easily replace the blades when they get dull.

Hex Key, Tip Size 7/32 in, Long Arm Length 6 in, Short Arm Length 3 in, Black Oxide, Length Family Long, Hex, Number of Tips 1, Non-Sparking No, Non-Magnetic No, Tether Ready No, Corrosion Resistant Yes, Insulated No, SAE.

If you want an accurate tape measure that lasts, then look no further than the Stanley 33-430 Tape Measure.

Hex Key, Tip Size 7/32 in, Long Arm Length 6 in, Short Arm Length 3 in, Black Oxide, Length Family Long, Hex, Number of Tips 1, Non-Sparking No, Non-Magnetic No, Tether Ready No, Corrosion Resistant Yes, Insulated No, SAE.

It has a blade length of 30 ft and a 1 in.2 in stud markings for quick and easy reference. Featuring a slide lock, this tape measure can be locked at any position along its length without having to remove it from the job site or tool box.