reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Workholding & Machine Tool Accessories,Fixture Clamps
J.W. WINCO

GN473-41-B16-ELS 2-Way Base Connector

About The The bore spacing of the GN 473 two-way base connector mini-clamps corresponds the connector mini-clamps and flange bolts. In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements

In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws. The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements. The bore spacing of the GN 473 two-way base connector mini-clamps corresponds the connector mini-clamps and flange bolts.

Workholding & Machine Tool Accessories,Fixture Clamps

GN473-41-B16-ELS 2-Way Base Connector

Workholding & Machine Tool Accessories,Fixture Clamps

Specifications of GN473-41-B16-ELS 2-Way Base Connector

Category
Instockinstock

Last Updated

GN473-41-B16-ELS 2-Way Base Connector
More Varieties

Rating :- 8.07 /10
Votes :- 28
GN 9080 universal joints are a simple and very competitively priced alternative.

GN 9080 universal joints are a simple and very competitively priced alternative.

Typical applications include all types of manual operations.GN9080-13-B8-EG Single Joint Steel They are recommended to be used for applications with very low revolutions only..

  • Bearings,V-belts & Power Transmission Equipment,Couplings,Collars,& Adapters,Universal Joints
  • J.W. WINCO
    • DIN508-14-M12-10 T-Slot Nut Steel

    DIN508-14-M12-10 T-Slot Nut Steel

    .DIN 508 T-slot nuts can be used as a fastener in various series of adjustable mounting systems.

  • Workholding & Machine Tool Accessories,T-Bolts
  • J.W. WINCO
    • GN 822.7 mini indexing plungers feature small, compact dimensions.

    GN 822.7 mini indexing plungers feature small, compact dimensions.

    . Mini indexing plungers combine a clever type of construction with a complete series of all current sizes of bolts and threads. Plungers are inserted into position by holding them by the knurled knob.

  • Machining,Detent,Lock,Pop And Plunger Pins
  • J.W. WINCO
    • GN 351 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    GN 351 vibration isolation mounts, also known as vibration mounts, anti-vibration mounts, vibration bobbins or rubber bumpers, are suitable for the elastic mounting of machine units such as motors, compressors and pumps.

    .GN351-100-55-M16-SS-55 Rubber Bumper Threaded Studs These rubber mounts are simple and economical construction elements. Their resilience and their broad range of different sizes and dimensions allow these mounts to be used in many applications that require vibration isolation.

  • Workholding & Machine Tool Accessories,Mounts and Vibration Control,Vibration Isolator Pads
  • J.W. WINCO
    • JW Winco GN638-21-M12-34-NI Leveling Feet
  • Hardware Supplies,Leveling Feet & Pads,Leveling Mounts
  • J.W. WINCO
    • DIN 906 threaded plugs are used to close bore holes with cylindrical tapered internal thread.

    DIN 906 threaded plugs are used to close bore holes with cylindrical tapered internal thread.

    5-GPC Threaded Plugs, Tapered thread The tightness depends on the medium, pressure, temperature and material pairing. The design with GPC thread coating provides a higher degree of safety..DIN-906-NI-M12X1.

  • AC & Refrigeration Components,Seal Plugs
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    .JW Winco GN115-ST-14-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO
    • GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    GN 115 cam latches close via a turning operation limited to 90° (quarter of a turn), which moves the latch arm behind the door frame.

    .JW Winco GN115-ST-14-SW Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

  • Door Hardware & Components,Door Latches,Cam Latches
  • J.W. WINCO
    • The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    The various types of mini-clamps are typically used to build support structures for mounting sensors, plexiglass guards, or other elements.

    In the standard version, the clamping force of the clamp onto the tube is achieved via the socket cap screws.GN473-41-B16-ELS 2-Way Base Connector The bore spacing of the GN 473 two-way base connector mini-clamps corresponds the connector mini-clamps and flange bolts..

  • Workholding & Machine Tool Accessories,Fixture Clamps
  • J.W. WINCO