GN537-32-38-A Oil Sight Glass Aluminum

The insert is connected to the lever via serrations that can easily be disengaged.WN300-KT-45-10X24-16-OS Adjustable Lever Steel All such levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position..

GN 632..

GN146-B50-65-2-BL Flanged Connector Clamp The clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert..

.GN 638 ball jointed leveling feet are a low cost solution for clamping operations or for load bearing purposes.

5 grub screws are typically used with thrust pads, making a low-cost solution for clamping operations or for load bearing purposes.GN 632..

Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees. The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required.

JW Winco GN115-SK-26 Cam Latch The beveled edges of the latch arm create a smooth latching of the door..

The fluid level sight glass is inserted into the bore.

.JW Winco GN115-SK-26 Cam Latch The beveled edges of the latch arm create a smooth latching of the door.

The fluid level sight glass is inserted into the bore. By simply tightening the ring nut using the pin key, the seal is pressed against the contact surface which, at the same time, holds the sight glass in position..