Grey HPPE Cut Resistant Black Sandy Nitrle Palm, Shrink Wrapped, Size XL (10)

024 in, 2 in Thickness, Thickness Tolerance +/-0.000 in, 2 1/2 in Overall Width, Width Tolerance +/-0.Flat Bar Stock, Aluminum, 6061, T6511, Sheet, 36 in Overall Length, Length Tolerance +/-3.024 in, Fabrication Extruded, Heat Treatment Pre-Hardened, Heat Treatable Yes, Mechanical Finish Mill, Yield Strength 37,000 psi, Tensile Strength 42,000 psi, 95 Brinell Hardness, B95 Rockwell Hardness, Includes Material Certificate Yes, Standards ASTM B221, AMS QQ-A-200/3.

A513 Carbon Steel Square Tube, Material Carbon Steel, Material Grade A513, Inside Height 2 53/64 in, Inside Width 2 53/64 in, Outside Height 3 in, Outside Width 3 in, Overall Length 4 ft, Fabrication Cold Finished, Mechanical Finish Mill, Wall Thickness 0.

Lne Splice Strght Repair Kit,15mm OD Lne.

0-7.9 3.

313 in, Tensile Strength 57,000 psi, Head Type Knurled, Maximum Head Height 0.313 in, System of Measurement Inch, For Use in Systems Jig and Fixture Component, Head Material Steel, Head Shape Round.-24, Fastener Length 2 1/2 in, Thread Style Fully Threaded, Thread Length 2 1/2 in, Head Width 0.875 in, Head Height 0.

-20, Fastener Length 2 1/2 in, Head Width 0.153 in, Drive Size #3, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.477 in, Minimum Head Width 0.477 in, Head Height 0.

/Thread Size 1/2 In.-20, Fastener Length 1 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNF (Fine), Fastener Thread Style Fully Threaded, Fastener Industry Standards ASME B18.

Coated Gloves, ANSI/ISEA Cut Level A7, Glove Style Knit, Knit Material HPPE, ANSI/ISEA Abrasion Level 3, Hand Protection Style Glove, ANSI/ISEA Needlestick Level - Palm Not Available, Additional Hazard Protection None, Standards ANSI/ISEA 105, Insulated No, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Glove Performance High Grip, 1 Pair.

1, Head Type Hex, Head Height 11/32 in, Head Width 3/4 in, Package Quantity 10.-20, Fastener Length 1 1/2 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNF (Fine), Fastener Thread Style Fully Threaded, Fastener Industry Standards ASME B18.

Coated Gloves, ANSI/ISEA Cut Level A7, Glove Style Knit, Knit Material HPPE, ANSI/ISEA Abrasion Level 3, Hand Protection Style Glove, ANSI/ISEA Needlestick Level - Palm Not Available, Additional Hazard Protection None, Standards ANSI/ISEA 105, Insulated No, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Glove Performance High Grip, 1 Pair.