Carbide End Mill,1/2 In. Dia,2 In. Cut L

About The , Carbide, Bright (Uncoated), Non-Coolant Through.Ball End Mill, 1/2 in Milling Dia

Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Cutting Tools,End Mills,Ball 4-Flute End Mills

Square End Mill, 1 in Milling Dia., Cobalt, TiCN, Weldon Flat, Length of Cut 4 in, Overall Length 6 1/2 in, Shank Dia.

Flat Bottom Drill Bit, 3.60 mm Size, 180 Degrees Point Angle, Solid Carbide, EgiAs Finish

Cutting Tools,End Mills,Ball 4-Flute End Mills

Specifications of Carbide End Mill,1/2 In. Dia,2 In. Cut L
Category
Instock	instock

Last Updated June 28th, 2024 05:24 pm

Carbide End Mill,1/2 In. Dia,2 In. Cut L

More Varieties

Rating :- 8.08 /10

Votes :- 29

Thread Forming Tap, 5/8-11, Modified Bottoming, TiCN, 0 Flutes

Thread Forming Tap, Thread Size 5/8 In.-11, UNC, Overall Length 4 21/64 in, Cobalt, TiCN, Right Hand, Thread Length 7/8 in, 75 Percent Thread Drill Size 37/64 in, Thread Limit H10, Class of Fit 2B, Tap Length Standard DIN.

Cutting Tools,Taps,Thread Forming Taps

OSG

Corner Radius Carbide End Mills

, Carbide, TiAlN, Non-Coolant Through, Shrink Fit, Fractional Inch, 0.03 in, 5/16 in, 4 in.

Cutting Tools,End Mills,Corner Radius End Mills

OSG

Corner Radius End Mill,Milling 3/8 dia.

045 in, 1/2 in, 4 in., Carbide, DUARISE, Non-Coolant Through, Straight, Fractional Inch, 0.Corner Radius End Mill, 3/8 in Milling Dia.

Cutting Tools,End Mills,Corner Radius 4-Flute End Mills

OSG

Straight Flute Hand Tap , 1/4-20 , Modified Bottoming , 4 Flutes,

-20, UNC, Modified Bottoming, Overall Length 3 7/32 in, High Speed Steel, Diamond, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size #7, Thread Limit 2B, Class of Fit 2B.Straight Flute Tap, Thread Size 1/4 In.

Cutting Tools,Taps,Straight Flute 4-Flute Taps

OSG