reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Cable Management,Heat Shrink Tubing
RAYCHEM

Shrink Tubing,0.75in ID,Clear,4ft,PK25

About The D. After Shrinking 0.D

Heat Shrink Tubing, Thin Wall, Material Polyolefin, Flexible, Flame Retardant No, Adhesive Lined No, Shrink Ratio 2:1, Use With Wire Size 4 AWG to 3/0 AWG, I.D. After Shrinking 0.38 in, Wall Thickness After Shrinking 0.03 in, Length 4 ft, Shrink Tubing Properties Abrasion Resistant, Solvent Resistant, Color Clear, Temp. Range -67 Degrees to 275 Degrees F, Package Style Individual Pieces, Min. 203 Degrees F, Dielectric Strength 600 V Before Shrinking 0.75 in, I.D. Shrink Temp.

Cable Management,Heat Shrink Tubing

Shrink Tubing,0.75in ID,Clear,4ft,PK25

Cable Management,Heat Shrink Tubing

Specifications of Shrink Tubing,0.75in ID,Clear,4ft,PK25

Category
Instockinstock

Last Updated

Shrink Tubing,0.75in ID,Clear,4ft,PK25
More Varieties

Rating :- 8.06 /10
Votes :- 33
Flex Twill Safety Cargo Pant,SP011-FLOR

Flex Twill Safety Cargo Pant,SP011-FLOR

Flex Twill Safety Cargo Pant,SP011-FLOR.

  • Personal Protective Equipment (PPE),Workwear and Protective Clothing,Workwear
  • TOUGH DUCK
    • Square End Mill, 5/16 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 9/16 in, Overall Length 2 5/16 in, Shank Dia.
  • Cutting Tools,End Mills,Square 2-Flute End Mills
  • YG-1 TOOL CO
    • End Mill,5/16 x 5/16 x 9/16 x 4

    End Mill,5/16 x 5/16 x 9/16 x 4

    High Performance Carbide End Mill.

  • Cutting Tools,Drill Bits,Jobber Length Drill Bits
  • YG-1 TOOL CO
    • Shaft Seal, 20 x 28 x 6 mm., HMS4, Nitrile Rubber

    Shaft Seal, 20 x 28 x 6 mm., HMS4, Nitrile Rubber

    Rotary Shaft Seal, Design Code HMS4, Inside Diameter 20 mm, Outside Diameter 28 mm, Overall Width 6 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 10 psi, Number of Lips 1, System of Measurement Metric, Case Coating None, Maximum Surface Speed 999 mps, Seal Type Single Lip Seal.

  • Motors,Motor Supplies,Shaft Seals & Adapters
  • SKF
    • Brazed Tool Bit,LT,4 In L,3/4 In W

    Brazed Tool Bit,LT,4 In L,3/4 In W

    Single-Point Tool Bit, LT, Carbide, Zinc, Left Hand, Shank Width 3/4 in.

  • Cutting Tools,Tool Bits and Engraving Tools,Tool Bits
  • MICRO 100
    • Drill Bushing,Type SF,Drill Size 6.2mm

    Drill Bushing,Type SF,Drill Size 6.2mm

    20 mm.Slip-Fixed/Renewable Drill Bushing (SF), Standard Wall, Headed, Metric, 6.

  • Cutting Tools,Drill Bushings,Renewable Bushings
  • ZORO SELECT
    • Range -67 Degrees to 275 Degrees F, Package Style Individual Pieces, Min.
  • Cable Management,Heat Shrink Tubing
  • RAYCHEM
    • Gray UHMW Polyethylene Plastic Sheet Stock 48 L x 48 W x 3/4 Thick

    Gray UHMW Polyethylene Plastic Sheet Stock 48 L x 48 W x 3/4 Thick

    75 in, Gray, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.

  • Plastics,Plastic Sheets
  • ZORO SELECT
    • Range -67 Degrees to 275 Degrees F, Package Style Individual Pieces, Min.
  • Cable Management,Heat Shrink Tubing
  • RAYCHEM
    • Gray UHMW Polyethylene Plastic Sheet Stock 48 L x 48 W x 3/4 Thick
  • Plastics,Plastic Sheets
  • ZORO SELECT