Spiral Wound Gasket With Graphite Filler, 3, 1/8 Thick, #1500

Weatherproof Swivel Photocell,Gray.

Cinema Beveled Edge Magnetic Nano White.

Ideal 4300 Paper Cutter Stand.

Weld Neck Flange, Raised Face, 3/4 in Nominal Pipe Size, Flanged x Weld Neck, 5 1/8 in Flange Outside Diameter, Stainless Steel, 316, Class Class 1500, For Pipe Schedule XXH, Number of Bolt Holes 4, 3/4 in Bolt Hole Diameter.

.35 mm, Temp. Buna-N O-Ring, 4mm Wide 27mm ID, PK25 Range -40 Degrees to 250 Degrees F, FDA Approved No, Properties Resistant to Oils, Resistant to Water, Application Standard 27 mm, Actual Width 4 mm, Color Black, Durometer 70 Shore A, Nominal Outside Dia.

1 in, Actual Width 0.

25 in, Retaining Rib Diameter Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM A582, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.

21, Resistance Properties Chemical-Resistant.Spiral Wound Flange Gasket, For Flange ANSI Class 1,500, For Pipe Size 3 in, Inside Diameter 3 5/8 in, Outside Diameter 6 7/8 in, Thickness 3/16 in, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -300 Degrees F, Maximum Operating Temperature 1,200 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 304, Inner Ring Stainless Steel Grade Not Applicable, Standards ASME B16.

25 in, Retaining Rib Diameter Not Applicable, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Pack Size Small Pack, System of Measurement Inch, Hex Width Not Applicable, Color Silver, Dimensional Standards ASTM A582, Hex Width Tolerance Not Applicable, Inside Diameter Tolerance 0 to 0.09 in, Outside Diameter 0.005 in.Spacer, Spacer Type Round, For Screw Size #2, Overall Length 1/8 in, Inside Diameter 0.

21, Resistance Properties Chemical-Resistant.Spiral Wound Flange Gasket, For Flange ANSI Class 1,500, For Pipe Size 3 in, Inside Diameter 3 5/8 in, Outside Diameter 6 7/8 in, Thickness 3/16 in, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -300 Degrees F, Maximum Operating Temperature 1,200 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 304, Inner Ring Stainless Steel Grade Not Applicable, Standards ASME B16.