tools-and-supplies.champsview.com

ALWAYS ^{Be Happy}

Categories

Play Games ^New

HVACR and Appliance Controls,Steam Traps

ARMSTRONG INTERNATIONAL

Steam Trap,30 Psi,450F,7-7/8 In. L

About The Steam Trap, (F)NPT Connections 1 1/4 in, Max. 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam. Temp

Steam Trap, (F)NPT Connections 1 1/4 in, Max. Temp. 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam Operating PSI 30 psi, End to End Length 7 7/8 in, Condensate Capacity Lbs/Hr 4,000 lb/hr, Max.

HVACR and Appliance Controls,Steam Traps

Steam Trap,30 Psi,450F,7-7/8 In. L

Speed Reducer,C-Face,56C/140TC,40:1

Square End Mill, 2 in Milling Dia., High Speed Steel, TiN, Weldon Flat, Length of Cut 4 in, Overall Length 6 1/2 in, Shank Dia.

More from 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam: ARMSTRONG INTERNATIONAL

HVACR and Appliance Controls,Steam Traps

Specifications of Steam Trap,30 Psi,450F,7-7/8 In. L
Category
Instock	instock

Last Updated June 19th, 2024 06:59 am

Steam Trap,30 Psi,450F,7-7/8 In. L

Rating :- 8.21 /10

Votes :- 30

Point SV525 H-Coated Premium Cobalt SV

Point SV525 H-Coated Premium Cobalt SV Point, High Speed Steel, PVD, 6, 11.1 mm, Measurement System Fractional Inch, ANSI Code SV525312.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Square End Mill, 3/8 in Milling Dia., Cobalt, TiN, Weldon Flat, Length of Cut 2 1/2 in, Overall Length 4 1/4 in, Shank Dia.

Square End Mill,Single End,3/8",Cobalt 3/8 in.

Cutting Tools,End Mills,Square 4-Flute End Mills

Point SV870 Hardslick Coated Carbide SV

Point SV870 Hardslick Coated Carbide SV Point, Carbide, PVD, 3, 6.

Cutting Tools,Drill Bits,Spade Blades and Indexable Drill Inserts

Square End Mill, 7/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 2 1/2 in, Shank Dia.

Not Applicable.Carbide End Mill,Sq,7/32,5/8 Cut L 1/4 in, Neck Dia.

Cutting Tools,End Mills,Carbide 4-Flute End Mills

Square End Mill, 7/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 2 1/2 in, Shank Dia.

Not Applicable.Carbide End Mill,Sq,7/32,5/8 Cut L 1/4 in, Neck Dia.

Cutting Tools,End Mills,Carbide 4-Flute End Mills