Universal Joint,NB,3/4 In Bore

Hex Key, Tip Size 7 mm, Long Arm Length 95 mm, Short Arm Length 35 mm, Natural, Length Family Short, Hex, Number of Tips 2, Non-Sparking Yes, Non-Magnetic Yes, Tether Ready No, Corrosion Resistant Yes, Insulated No, Metric.

81AY375120SC Abrasive Nylon Brush.5" Brush Part, 3" OAL 120Sc., 120SC, 1. For .

03 in, 1 1/4 in, 6 in., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.Corner Radius End Mill, 1 in Milling Dia.

Screw Machine Drill Bit, Drill Bit Size 13.40 mm, Drill Bit Point Angle 140 Degrees , Carbide, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.5276.

000/-0.000 in, 1 1/4 in Hex Width, Width Tolerance +0.006 in, Fabrication Cold Finished, Heat Treatment Annealed, Heat Treatable Yes, Mechanical Finish Mill, Yield Strength 30,000 psi, Tensile Strength Not Rated, 255 Brinell Hardness, C25 Rockwell Hardness, Includes Material Certificate Yes, Standards ASTM A582, QQ-S-764, SAE AMS5640, Minimum Temperature Not Rated.

375 in, Thickness Tolerance +/-0.

010 in.-18, Standoff Thread Gender Female-Female, Cap Head Height Not Applicable, Cap Head Diameter Not Applicable, Overall Length 3 in, Body Length 3 in, Thread Length 3/4 in, Body Thread Length 3/4 in, Hex Width Not Applicable, Square Size Not Applicable, Outside Diameter 3/4 in, Shape Round, Material Aluminum, Finish Black Anodized, Pack Size Small Pack, System of Measurement Inch, Color Black, Overall Length Tolerance +/-0.Standoff, Thread Size 5/16 In.

Universal Joint, Coupling Size NB-10B, Overall Length 4 1/4 in, Maximum Bore Diameter 1 1/8 in, Maximum Operating Angle 25 Degrees , Yoke Length 2 1/8 in, Boot Material Not Applicable, Bore Diameter 3/4 in, Number of Joints Single, Joint Diameter 1 1/2 in, Maximum Torque 850 in-lb, Maximum Speed 6,000 RPM, U-Joint Material Carbon Steel, Joint Type Needle Bearing, Booted No, Outside Diameter 1 1/2 in, Keyway Depth Not Applicable, Keyway Width Not Applicable, Length through Bore 1 3/16 in.

-18, Standoff Thread Gender Female-Female, Cap Head Height Not Applicable, Cap Head Diameter Not Applicable, Overall Length 3 in, Body Length 3 in, Thread Length 3/4 in, Body Thread Length 3/4 in, Hex Width Not Applicable, Square Size Not Applicable, Outside Diameter 3/4 in, Shape Round, Material Aluminum, Finish Black Anodized, Pack Size Small Pack, System of Measurement Inch, Color Black, Overall Length Tolerance +/-0.

Universal Joint, Coupling Size NB-10B, Overall Length 4 1/4 in, Maximum Bore Diameter 1 1/8 in, Maximum Operating Angle 25 Degrees , Yoke Length 2 1/8 in, Boot Material Not Applicable, Bore Diameter 3/4 in, Number of Joints Single, Joint Diameter 1 1/2 in, Maximum Torque 850 in-lb, Maximum Speed 6,000 RPM, U-Joint Material Carbon Steel, Joint Type Needle Bearing, Booted No, Outside Diameter 1 1/2 in, Keyway Depth Not Applicable, Keyway Width Not Applicable, Length through Bore 1 3/16 in.