reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Cutting Tools,Taps,Spiral Flute 3-Flute Taps
KODIAK CUTTING TOOLS

M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide

About The Spiral Point Hi-Vanadium SteamMetric

Spiral Point Hi-Vanadium SteamMetric

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide

Cutting Tools,Taps,Spiral Flute 3-Flute Taps

Specifications of M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide

Category
Instockinstock

Last Updated

M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide
More Varieties

Rating :- 9.81 /10
Votes :- 31
SM-41 Type SM Carbide Bur Pted Cone Single Cut

SM-41 Type SM Carbide Bur Pted Cone Single Cut

Demands greater operator skill since thesingle flute direction pulls the bur into thework piece.Type SMPointed ConeSingle Cut Carbide BursProvides the best surface finish and largestcontact patch on the work piece..

  • Deburring Abrasives & Tools,Carbide Burs
  • KODIAK CUTTING TOOLS
    • SD-2 Type SD Carbide Bur Round Ball Nose Double Cut

    SD-2 Type SD Carbide Bur Round Ball Nose Double Cut

    .Type SDRound Ball NoseDouble Cut Carbide BursMost popular geometry as the dual flutedirection reduces the contact patch on thework piece and therefore provides easieroperator control while still maintaining agood surface finish.

  • Deburring Abrasives & Tools,Carbide Burs
  • KODIAK CUTTING TOOLS
    • These Kodiak Cutting Tools® solid carbide jobber drills feature a 25 degree helix angle and a 118 degree split point.

    These Kodiak Cutting Tools® solid carbide jobber drills feature a 25 degree helix angle and a 118 degree split point.

    . This coating is extremely heat resistant and can be used with or without coolant.7/64 Carbide Jobber Length Drill ALTIN Coated It is exceptional in difficult to machine materials where adhesive wear is particularly high.

  • Cutting Tools,Drill Bits,Jobber Length Drill Bits
  • KODIAK CUTTING TOOLS
    • B High Speed Steel Reamer Right-Hand Spiral
  • Cutting Tools,Reamers,Hand Reamers
  • KODIAK CUTTING TOOLS
    • The radius chipbreakers on the Kodiak Cutting Tools® high performance roughing and finishing tool allow for higher feed rates than a finishing endmill yet do not appreciably degrade the finish that the tool produces.Premium Sub-Micrograin Solid Carbide End MillCenter Cutting Carbide EndmillWorks well in hard to machine materials such as stainless steel and titaniumRougher/FinisherWhy use our Corner Radius tools?  Corner radius end mills improve productivity and reduce costs.A sharp corner of an end mill is its weakest point.
  • Cutting Tools,End Mills,Carbide 4-Flute End Mills
  • KODIAK CUTTING TOOLS
    • #12-28 TIN Coated Tap Bottom Chamfer
  • Cutting Tools,Taps,Straight Flute 4-Flute Taps
  • KODIAK CUTTING TOOLS
    • M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide
  • Cutting Tools,Taps,Spiral Flute 3-Flute Taps
  • KODIAK CUTTING TOOLS
    • 1-1/64 Drill Taper Shank Black Oxide Finish 118 Deg. Pt

    1-1/64 Drill Taper Shank Black Oxide Finish 118 Deg. Pt

    Morse taper shanks range from MT1 to MT5These drills are sold individually.

  • Cutting Tools,Drill Bits,Taper Shank Drill Bits
  • KODIAK CUTTING TOOLS
    • M4 X 0.7 Spiral Pt Plug Tap High Vanadium Metric Steam Oxide
  • Cutting Tools,Taps,Spiral Flute 3-Flute Taps
  • KODIAK CUTTING TOOLS
    • 1-1/64 Drill Taper Shank Black Oxide Finish 118 Deg. Pt

    1-1/64 Drill Taper Shank Black Oxide Finish 118 Deg. Pt

    Made with Premium Grade High Speed Steel118 Degree Drill Point AngleThese taper shank drill feature the standard Morse taper shank designAvailable in larger sizes, up to a 2 Inch drill diameter.Morse taper shanks range from MT1 to MT5These drills are sold individually.

  • Cutting Tools,Drill Bits,Taper Shank Drill Bits
  • KODIAK CUTTING TOOLS