Extension Tap, M4.5-0.50, Semi-Bottoming, Modified Bottoming, V

About The 5, Metric Fine, Overall Length 100.5x0.00 mm, VC-10, V, Right Hand

Extension Tap, Thread Size M4.5x0.5, Metric Fine, Overall Length 100.00 mm, VC-10, V, Right Hand

Cutting Tools,Taps,Extension Taps

Micro Drill Bit,50mm L,3.00mm Shank dia.

0.093 In.,Max.

Cutting Tools,Taps,Extension Taps

Specifications of Extension Tap, M4.5-0.50, Semi-Bottoming, Modified Bottoming, V
Category
Instock	instock

Last Updated June 14th, 2024 08:08 am

Extension Tap, M4.5-0.50, Semi-Bottoming, Modified Bottoming, V

More Varieties

Rating :- 9.76 /10

Votes :- 27

Corner Radius End Mill,nACo,4.000 L

, Carbide, nACRo, Straight, Fractional Inch, 0.Corner Radius End Mill, 1/2 in Milling Dia.03 in, 1 3/4 in, 4 in.

Cutting Tools,End Mills,Corner Radius 4-Flute End Mills

ZORO SELECT

Corner Radius End Mill,0.500 Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia.03 in, 1 3/4 in, 4 in.

Cutting Tools,End Mills,Corner Radius End Mills

ZORO SELECT

Corner Radius End Mill,0.500 Shank dia.

09 in, 1 3/4 in, 4 in., Carbide, nACRo, Straight, Fractional Inch, 0.Corner Radius End Mill, 1/2 in Milling Dia.

Cutting Tools,End Mills,Corner Radius End Mills

ZORO SELECT

Spray Primer, Black, Flat Finish, 12 oz.

Spray Primer, Resin Type Alkyd Enamel, Color Black, Base Type Solvent, Dry Time 12 min, Dry Time Tack Free 1 hr, Net Weight 12 oz.

Paints & Stains,Spray Paint & Primer,Spray Primer

KRYLON INDUSTRIAL

Square End Mill, 1/2 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia.

500" Shank dia.End Mill,Uncoated,0. 1/2 in.

Cutting Tools,End Mills,Square 3-Flute End Mills

ZORO SELECT

Chamfer Mill,1Cutter dia,AlTiN,1-1/2L

Single End, Chamfer Mill, 90 Degrees Included Angle, 1 in Milling Dia., Carbide, AlTiN, Fractional Inch.

Cutting Tools,End Mills,Corner Chamfer End Mills

ZORO SELECT

0.093 In.,Max.

) NA,Deflection @ Load 0. Outside Dia.310 In.

Springs,Disc Springs

SPEC