Vacuum Pad,Flat,4mm

Soldering Tip, Tip Type Screwdriver, Tip Width 2.4 mm, Compatible Handpiece Manufacturer Model Number 30PC29, 30PC30, Compatible Handpiece Manufacturer Westward, Application Soldering.

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 5/16 in, Overall Length 1 1/2 in, Thread Size 1/4 In.4375 in, Washer Outside Diameter 0.

5 KPa), Total Uncertainty 0..200 Percent, High Side Compatible With Non-Corrosive Gas, Low Side Compatible With Non-Corrosive Gas, Fitting Material Stainless Steel, For Use With Fluke Calibrators, NIST Traceable Calibration Certificate, Includes Adapters, Certificate of Calibration, Manufacturers Warranty Length 3 yr.

Carbide End Mill,404,9/64 D,1/2 Cut L 3/16 in.

Carbide End Mill,404,5/16 D,13/16 Cut L 5/16 in.

Ball End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through.

Vacuum Pad, Pad Diameter 13 mm, Pad Height 12 mm, Minimum Operating Temperature 0 Degrees C, Maximum Operating Temperature 120 Degrees C, Pad Color Black, Durometer 50A, Pad Type Flat, Pad Material NBR.

Vacuum Pad, Pad Diameter 4 mm, Pad Height 12 mm, Minimum Operating Temperature -10 Degrees C, Maximum Operating Temperature 200 Degrees C, Pad Color Black with Two Silver Marks, Durometer 50A, Pad Type Flat, Pad Material Conductive Silicone.

Vacuum Pad, Pad Diameter 13 mm, Pad Height 12 mm, Minimum Operating Temperature 0 Degrees C, Maximum Operating Temperature 120 Degrees C, Pad Color Black, Durometer 50A, Pad Type Flat, Pad Material NBR.

Vacuum Pad, Pad Diameter 4 mm, Pad Height 12 mm, Minimum Operating Temperature -10 Degrees C, Maximum Operating Temperature 200 Degrees C, Pad Color Black with Two Silver Marks, Durometer 50A, Pad Type Flat, Pad Material Conductive Silicone.