Helmet Suspension Helmet,Blue, Class C, Type 1

3" Keyed Hole, Dim B (2): 4.8" x3" x1.Pump Drive Shaft, Keyed 4.770" Long.

Copper Sheet.

25 in, Ball Stud Thread Direction Not Applicable, Housing Material Finish Plain/Uncoated, Maximum Ball Swivel Not Applicable.25 in, Shank Thread Length 1 1/8 in, Shank Thread Size 1/4 In.Rod End Bolt, System of Measurement Inch, Ball Stud Center Length Not Applicable, Ball Stud Thread Length Not Applicable, Ball Stud Thread Size Not Applicable, Bore Diameter 1/4 in, Head Outside Diameter 5/8 in, Head Width 0.

Solid Threshold Ramp, Load Capacity 600 lb, Aluminum Material, 2.6 in Maximum Rise, 16 in Extended Length, 32 in Usable Width, Pre-Drilled Holes for Optional Permanent Mounting Includes.

Slng Lftng 2X30Ft Nyl Eye To Eye T-4.

Swing/Toggle Clamp, Product Type Sensor Cable, Compatible Product Type Gripper, Rotary, Slide, Compatible with Series CT, DCT, DGC, DLB, DLM, DLT, DPDL, DPDS, DPE-200, DPE-400, DPG, DPL, DPP, DPW, DRF, DRG, GC, MPS, PPC, RA, RDH, REP, RFE, RN, RP, RP-P, RPC, RPE-100, RPL, RPLC, RPS, RPW, RR, RTH, RUA, Cable Length 5 m.

Suspension Helmet,Blue, ANSI Classification Class C, Type 1, Head Protection Style Helmet, Head Protection Suspension Type Ratchet (4-Point), Head Protection Color Blue, Head Protection Graphics No Graphics, Fits Hat Size 6 3/8 to 7 5/8, Head Protection Material ABS, Accessory Mounting Options 4 Hooks, Front-Slots, Side-Slots, Head Protection Venting Yes, Low Temperature Test Met Yes, High Temperature Test Met Yes, High-Visibility Yes, Compatible Suspension Brand Name Kinetix.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Cut-Resistance Coverage Palm Side, Hand Protection Style Glove, Cuff Style Shirred Slip-On, Glove Insulation Material Thinsulate(TM), Palm Material Polyester, Glove Liner Material HPPE, Glove Back Material Microfiber, Glove Back Color Black/Gray, Glove Construction Cut and Sewn, Standards ANSI/ISEA 105, ANSI/ISEA Cut Level A5, Touchscreen Compatible Yes, 1 Pair.

Suspension Helmet,Blue, ANSI Classification Class C, Type 1, Head Protection Style Helmet, Head Protection Suspension Type Ratchet (4-Point), Head Protection Color Blue, Head Protection Graphics No Graphics, Fits Hat Size 6 3/8 to 7 5/8, Head Protection Material ABS, Accessory Mounting Options 4 Hooks, Front-Slots, Side-Slots, Head Protection Venting Yes, Low Temperature Test Met Yes, High Temperature Test Met Yes, High-Visibility Yes, Compatible Suspension Brand Name Kinetix.

Mechanics Gloves, Additional Hazard Protection None, Glove Style Mechanics, Cut-Resistance Coverage Palm Side, Hand Protection Style Glove, Cuff Style Shirred Slip-On, Glove Insulation Material Thinsulate(TM), Palm Material Polyester, Glove Liner Material HPPE, Glove Back Material Microfiber, Glove Back Color Black/Gray, Glove Construction Cut and Sewn, Standards ANSI/ISEA 105, ANSI/ISEA Cut Level A5, Touchscreen Compatible Yes, 1 Pair.