reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Carbon Steel,Carbon Steel Rods
ZORO SELECT

Rod,Steel,1018,7/8 In Dia X 1 Ft L

About The 1018 Carbon Steel Rod, Material Carbon Steel, Material Grade 1018, Overall Length 12 in, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Outside Diameter 7/8 in, Outside Diameter Tolerance +0.0000 in/-0.0020 in, Yield Strength 55,000 psi, Fabrication Cold Finished, Rockwell Hardness Not Rated, Brinell Hardness 70, Tensile Strength 65,000 psi, Machinability 78 Percent, Length Tolerance +/-1

1018 Carbon Steel Rod, Material Carbon Steel, Material Grade 1018, Overall Length 12 in, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Outside Diameter 7/8 in, Outside Diameter Tolerance +0.0000 in/-0.0020 in, Yield Strength 55,000 psi, Fabrication Cold Finished, Rockwell Hardness Not Rated, Brinell Hardness 70, Tensile Strength 65,000 psi, Machinability 78 Percent, Length Tolerance +/-1.000 in, Includes Material Certificate Yes, Standards ASTM A108, ASTM A29

Carbon Steel,Carbon Steel Rods

Rod,Steel,1018,7/8 In Dia X 1 Ft L

Carbon Steel,Carbon Steel Rods

Specifications of Rod,Steel,1018,7/8 In Dia X 1 Ft L

Category
Instockinstock

Last Updated

Rod,Steel,1018,7/8 In Dia X 1 Ft L
More Varieties

Rating :- 8.17 /10
Votes :- 28
16-14 AWG Non-Insulated Ring Terminal #10 Stud PK1000

16-14 AWG Non-Insulated Ring Terminal #10 Stud PK1000

33 in, Contact Material Nickel Alloy, Standards CSA Certified, UL Listed, Insulation Type Non-Insulated, Overall Length 0.Ring Terminal, Insulation Color Bare, Maximum Operating Temperature 900 Degrees F, Maximum Voltage 600 V, Minimum Wire Size 16 AWG, Maximum Wire Size 14 AWG, Termination Style Crimp, Tongue Width 0.7 in, Package Quantity 1000.

  • Wire Connectors & Terminals,Wire Connectors & Disconnects,Wire Terminals
  • 3M
    • 2.878 in, Max.

    2.878 in, Max.

    3 1/4 in, Seal Durometer 70 Shore A, Temp..

  • Sealing & Gasketing,Rod & Piston Seals
  • ZORO SELECT
    • DC Gearmotor, 150.0 in-lb Max. Torque, 37 RPM Nameplate RPM, 90V DC Voltage

    DC Gearmotor, 150.0 in-lb Max. Torque, 37 RPM Nameplate RPM, 90V DC Voltage

    DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 37 RPM, Maximum Torque 150 in-lb, Overhung Load Capacity 130 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 49:1, Input Horsepower 1/10 hp, Output Shaft Diameter 1/2 in, Bearing Type Ball on Motor, Needle Throughout.

  • Motors,Gearmotors,AC Gear Motors
  • DAYTON
    • Shaft,Carbon Steel,25 mm,1000 mm

    Shaft,Carbon Steel,25 mm,1000 mm

    Linear Bearing Shaft, For Use With Thomson Linear Ball Bushing Bearings, System of Measurement Metric, Surface Roughness 8 uin.

  • Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Linear Shafts & Support Rails
  • THOMSON
    • 140 Degrees F, Min.

    140 Degrees F, Min.

    Operating Temp.

  • Batteries & Battery Chargers,Coin & Button Batteries
  • ZORO SELECT
    • Submersible Level Transmitter,To 15 PSI

    Submersible Level Transmitter,To 15 PSI

    25 Percent of Full Scale, Cable Length 60 ft, Cable Coating ETFE, Process Connection Size 1/2 in, Process Connection Type NPT, Sensor Length 6.7 in, Electrical Protection Yes, Power Required 10 to 30V DC, Series SBLT2, Cable Material ETFE, Electrical Connections Cable & Wire Leads, Housing Material 316 Stainless Steel, Includes Instructions.Submersible Level Transmitter, Output 4 to 20mA DC, Tip Design Bullet Nose, Minimum Pressure 0 psi, Maximum Pressure 15 psi, Accuracy +/-0.

  • Pressure & Vacuum Measuring,Transmitters
  • MERCOID
    • Rod,Steel,1018,7/8 In Dia x 1 Ft L

    Rod,Steel,1018,7/8 In Dia x 1 Ft L

    000 in, Includes Material Certificate Yes, Standards ASTM A108, ASTM A29.0020 in, Yield Strength 55,000 psi, Fabrication Cold Finished, Rockwell Hardness Not Rated, Brinell Hardness 70, Tensile Strength 65,000 psi, Machinability 78 Percent, Length Tolerance +/-1.

  • Carbon Steel,Carbon Steel Rods
  • ZORO SELECT
    • Bar,Rect,Stl,1018,3/4 x 4 In,1 Ft L

    Bar,Rect,Stl,1018,3/4 x 4 In,1 Ft L

    75 in, Thickness Tolerance -0.

  • Carbon Steel,Carbon Steel Sheets
  • ZORO SELECT
    • Rod,Steel,1018,7/8 In Dia x 1 Ft L

    Rod,Steel,1018,7/8 In Dia x 1 Ft L

    0000 in/-0.0020 in, Yield Strength 55,000 psi, Fabrication Cold Finished, Rockwell Hardness Not Rated, Brinell Hardness 70, Tensile Strength 65,000 psi, Machinability 78 Percent, Length Tolerance +/-1.000 in, Includes Material Certificate Yes, Standards ASTM A108, ASTM A29.

  • Carbon Steel,Carbon Steel Rods
  • ZORO SELECT
    • Bar,Rect,Stl,1018,3/4 x 4 In,1 Ft L

    Bar,Rect,Stl,1018,3/4 x 4 In,1 Ft L

    003 in, Overall Length 12 in, Overall Width 4 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Yield Strength 55,000 psi, Tensile Strength 80,000 psi, Brinell Hardness 70, Rockwell Hardness Not Rated, Machinability 78 Percent, Standards ASTM A108, ASTM A29, Appearance Unpolished, Length Tolerance +/-1 in.1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.75 in, Thickness Tolerance -0.

  • Carbon Steel,Carbon Steel Sheets
  • ZORO SELECT