Bore Polisher,B-305,180 Grit

Acrylic Adhesive, Container Type Syringe, Coverage Dependent On Substrate, Cure Method Ambient, Cured Color Yellow, Features Fast-Curing, Gap Filling, Shockproof, For Use With Dispensing Syringe and Mixing Tip, Included Components Resin and Hardener, Interior/Exterior Interior/Exterior, Low Odor No, Marine Grade No, Materials Bonded Ceramic, Concrete, Glass, Masonry, Metal, Plastic, Rubber, VOC Content Weight Less Than 50 g/L, VOC Content Weight Percentage Less Than 3 Percent.

Test Gauge, Material Chrome.

00 in Centers, Series A.03 in, Height - Snap Action Switch 1.

1 2014, Series North Zone.Hard Hat, ANSI Classification Type 1, Class E, Head Protection Style Front Brim, Head Protection Suspension Type Ratchet (4-Point), Head Protection Color Orange, Head Protection Graphics No Graphics, Fits Hat Size 6-1/2 to 8, Head Protection Material Polyethylene, Accessory Mounting Options Side-Slots, Head Protection Venting No, High-Visibility No, Standards ANSI/ISEA Z89.

Burn Dressing, Sterile, Color White, Material Non-Woven, Waterproof No, Package Type Unitized, Width 4 in, Length 4 in.

Chemical Resistant Gloves, Nitrile, Palm and Fingers, 26 in, Cuff Elastic, Lining Interlock Knit, Glove Size 11, Color Blue, Supported, Standards USDA and FDA Regulations, 21 CFR, for Use In Food Processing, Resists Abrasions and Punctures, Cuts, Snags, Solvents, 1 Pair.

Bore Polisher, Abrasive Type Coated, Grit 180, Abrasive Material Aluminum Oxide, Series R369, Backing Material Cotton/Polyester, Backing Weight Y, Compatible Bore Inner Diameter (Maximum) 1 in, Compatible Bore Inner Diameter (Minimum) 5/8 in, Maximum Operating Speed 25,000 RPM, Compatible Mandrel Grainger Part Number 3RB56, Compatible Mandrel Manufacturer Model Number 08834154182, 08834154460.

Sanding Belt, Abrasive Material Aluminum Oxide, Abrasive Type Coated, Coating Coverage Closed, Grit P80, Series YP0998W, Grade Coarse, Overall Length 18 in, Overall Width 1/2 in, Resistance Properties Fray, Tear, Backing Material Polyester, Backing Weight Y, Belt Joint Type Butt Joint, Bond Type Resin, Color Brown.

Bore Polisher, Abrasive Type Coated, Grit 180, Abrasive Material Aluminum Oxide, Series R369, Backing Material Cotton/Polyester, Backing Weight Y, Compatible Bore Inner Diameter (Maximum) 1 in, Compatible Bore Inner Diameter (Minimum) 5/8 in, Maximum Operating Speed 25,000 RPM, Compatible Mandrel Grainger Part Number 3RB56, Compatible Mandrel Manufacturer Model Number 08834154182, 08834154460.

Sanding Belt, Abrasive Material Aluminum Oxide, Abrasive Type Coated, Coating Coverage Closed, Grit P80, Series YP0998W, Grade Coarse, Overall Length 18 in, Overall Width 1/2 in, Resistance Properties Fray, Tear, Backing Material Polyester, Backing Weight Y, Belt Joint Type Butt Joint, Bond Type Resin, Color Brown.