External Retaining Ring, Steel Zinc Yellow Finish, 13/16 In Shaft Dia, 50 PK

Class X No-Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.3400 in, Dimension Type Inch, Gauge Type No-Go (Minus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.2811 in to 0.

7950 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.7901 in to 0.

8951 in to 0.

-18, UNF, Plug, Overall Length 3 19/32 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 21/32 in.

Start Capacitor,CS189227X110.

4 mm, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 34 mm, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 15 mm, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 15 mm, Maximum Speed 4,000 RPM, Maximum Torque 200 N-m, Overall Length 50 mm.Rigid Shaft Coupling, Bore Diameter 1 15 mm, Bore Diameter 2 15 mm, Bore Type Round, Clearance Diameter 39.

046 in, Fits Groove Depth 0.762 in, Fits Groove Width 0.

125 in, Inside Diameter Tolerance +0.

15 in, Material Steel, Finish Zinc Plated, Material Grade/Class Ungraded, Tensile Strength 150,000 psi, Ring Type External Retaining Ring, Clearance Diameter Type Expanded.

000 in, Outside Diameter 1.625 in, Outside Diameter Tolerance +/-0.