reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Links
TSUBAKI

Connecting Link,A-1 Attachment,PK5

About The 675 in, Centerline to Hole Center 0.283 in, Chain Number 40, Roller Diameter 19/64 in, Finish Plain, Pitch 1/2 in, Link Type Attachment, Centerline to Attachment End 0.156 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 2, Pin Contruction Riveted Pin, Plate Height 0

Attachment Link, Attachment Number A-1, Attachment Type Tab, Material Steel, Chain Overall Width 1.283 in, Chain Number 40, Roller Diameter 19/64 in, Finish Plain, Pitch 1/2 in, Link Type Attachment, Centerline to Attachment End 0.675 in, Centerline to Hole Center 0.608 in, Extended Pin Diameter 0.156 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 2, Pin Contruction Riveted Pin, Plate Height 0.472 in

Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Links

Connecting Link,A-1 Attachment,PK5

Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Links

Specifications of Connecting Link,A-1 Attachment,PK5

Category
Instockinstock

Last Updated

Connecting Link,A-1 Attachment,PK5
More Varieties

Rating :- 8.08 /10
Votes :- 28
Carbide End Mill, Dia 0.030, Cut L 0.090

Carbide End Mill, Dia 0.030, Cut L 0.090

03 in Milling Dia.Ball End Mill, 0., Carbide, Bright (Uncoated), Non-Coolant Through.

  • Cutting Tools,End Mills,Ball 2-Flute End Mills
  • MICRO 100
    • Square End Mill, 3.50 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia.
  • Cutting Tools,End Mills,Carbide 3-Flute End Mills
  • MICRO 100
    • Boring Bar, 3-1/2 in L, Carbide

    Boring Bar, 3-1/2 in L, Carbide

    Boring Bar, Boring, AlTiN, 0.2400 in, Micro-Quik Tool Holder.

  • Cutting Tools,Indexable Tools,Indexable Boring Bars
  • MICRO-QUIK
    • Cam Follower,Crowned,Yoke Type,Sealed

    Cam Follower,Crowned,Yoke Type,Sealed

    Yoke Roller, Bore Diameter 1/4 in, Closure Double Sealed, Duty Type Standard, Overall Length 9/16 in, Roller Diameter 3/4 in, Roller Head Type Crowned, Roller Material Alloy Steel, Roller Width 1/2 in, Rolling Element Rows 1, Seal Type Contact, System of Measurement Inch, Bearing Material Alloy Steel, Bearing Material Grade 52100, Bearing Type Needle Roller, Dynamic Radial Load Capacity 2,140 lbf.

  • Bearings,V-belts & Power Transmission Equipment,Linear Bearings & Guides,Cam Followers & Track Rollers
  • SMITH BEARING
    • Hex Hanger with Insert,2-1/2 In.

    Hex Hanger with Insert,2-1/2 In.

    Hex Hanger with Insert, Clamp Connection Type Bolt, Clamp Type Hanger with Insert, Body Material Stainless Steel, Material Grade 304, Compatible Tube Size 2 1/2 in, Compatible Tube Wall Thickness 0.065 in.

  • Pipes,Valves & Fittings,Plumbing Accessories,Pipe Hangers
  • ZORO SELECT
    • Pneumatic Actuated Ball Valve, Body Material 316 Stainless Steel, Body Style Inline, Valve Structure 3-Piece, Pipe Size 1 in, Connection Type Clamp, Full Port, Max.

    Pneumatic Actuated Ball Valve, Body Material 316 Stainless Steel, Body Style Inline, Valve Structure 3-Piece, Pipe Size 1 in, Connection Type Clamp, Full Port, Max.

    Inlet Pressure 120 psi, Temp.1" Compr Stainless Steel Pneumatic Ball Valve Inline Range 14 Degrees to 140 Degrees F, Ball Material 316 stainless steel, Seat Material PTFE, Stem Material 316 stainless steel, Body Seal Material PTFE, Standards 3A and FDA Pressure 1000 psi CWP, Required Pressure 80 psi, Max..

  • Compressors,Air Tanks & Pneumatic Parts,Pneumatic Valves,Pneumatic Flow Control Valves
  • ZORO SELECT
    • 5V2360 V-Belt, 236 Outside Length, 5/8 Top Width, 1 Ribs

    5V2360 V-Belt, 236 Outside Length, 5/8 Top Width, 1 Ribs

    V-Belt, Belt Material Polyester Cords, Rubber, Edge Construction Wrapped, Industry Number 5V2360, Number of Bands 1, Outside Length 236 in, Reinforcing Cord Material Polyester, Thickness 17/32 in, Top Width 5/8 in, Belt Trade Size 5V, V-Belt Type Wedge, Maximum Operating Temperature 194 Degrees F, Minimum Operating Temperature -22 Degrees F, Resistance Properties Heat Resistant, Oil Resistant.

  • Bearings,V-belts & Power Transmission Equipment,Power Transmission Belts,V-Belts
  • DAYTON
    • Connecting Link,A-1 Attachment,PK5

    Connecting Link,A-1 Attachment,PK5

    675 in, Centerline to Hole Center 0.472 in.156 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 2, Pin Contruction Riveted Pin, Plate Height 0.283 in, Chain Number 40, Roller Diameter 19/64 in, Finish Plain, Pitch 1/2 in, Link Type Attachment, Centerline to Attachment End 0.

  • Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Links
  • TSUBAKI
    • 5V2360 V-Belt, 236 Outside Length, 5/8 Top Width, 1 Ribs

    5V2360 V-Belt, 236 Outside Length, 5/8 Top Width, 1 Ribs

    V-Belt, Belt Material Polyester Cords, Rubber, Edge Construction Wrapped, Industry Number 5V2360, Number of Bands 1, Outside Length 236 in, Reinforcing Cord Material Polyester, Thickness 17/32 in, Top Width 5/8 in, Belt Trade Size 5V, V-Belt Type Wedge, Maximum Operating Temperature 194 Degrees F, Minimum Operating Temperature -22 Degrees F, Resistance Properties Heat Resistant, Oil Resistant.

  • Bearings,V-belts & Power Transmission Equipment,Power Transmission Belts,V-Belts
  • DAYTON
    • Connecting Link,A-1 Attachment,PK5

    Connecting Link,A-1 Attachment,PK5

    156 in, Lubrication SAE 10 to SAE 50, Maximum Operating Temperature 300 Degrees F, Minimum Operating Temperature 15 Degrees F, Number of Tab Holes 2, Pin Contruction Riveted Pin, Plate Height 0.

  • Bearings,V-belts & Power Transmission Equipment,Chains & Chain Sprockets,Chain Links
  • TSUBAKI