Surface Conditioning Disc,4-1/2In,Medium

Microfinishing Film Roll, Abrasive Type Coated, Abrasive Material Aluminum Oxide, Backing Material Polyester Film, Backing Weight 5 mil, Coating Coverage Open, Color Yellow, Grade Medium, Grit 60 micronm, Series Q351S, Overall Length 150 ft, Overall Width 1 in.

Surface-Conditioning Belt, Abrasive Material Aluminum Oxide, Abrasive Type Non-Woven, Coating Coverage Not Applicable, Grit Not Applicable, Series Surface Prep, Grade Fine, Overall Length 18 in, Overall Width 3/4 in, Resistance Properties Smear, Backing Material Polyester, Backing Weight Y, Bond Type Resin, Color Blue.

,60 Grit,PK50, Abrasive Type Silicon Carbide, Abrasive Material Silicon Carbide, Series Norton Merit, Color Black, Package Quantity 50.Quick Change Disc,3 In.

Aluminum Oxide, Connector Type Unthreaded Hole, Specification 32A46-MVBE, Wheel Type Type 35, Maximum Operating Speed 2,070 RPM, Bond Type Vitrified, Color Gray, Item Plate Mounted Grinding Disc.

014 in, Bristle Trim Length 1 1/4 in, Abrasive Material Carbon Steel, Face Width 1/2 in, Max. Wire RPM 9,000 RPM, For Use With Bench Grinders, Pedestal Grinders, Right Angle Grinders 6 in, Mounting Type Arbor Hole, Arbor Hole Size 5/8 in, Abrasive Shank Size No Shank, Wire Dia.014" dia.

Sanding Sheet, Abrasive Type Coated, Abrasive Material Aluminum Oxide, Backing Material Paper, Backing Weight C, Coating Coverage Open, Grit P60, Series A213, Overall Length 9 in, Overall Width 3 11/16 in, Attachment Type Not Applicable, Color Brown, Grade Coarse, Package Quantity 6.

Hook-and-Loop Surface Conditioning Disc, Abrasive Type Non-Woven, Abrasive Material Aluminum Oxide, Backing Material Nylon, Backing Weight X, Coating Coverage Not Applicable, Grade Medium, Grit 80, Overall Diameter 4 1/2 in, Series Surface Prep, Resistance Properties Smear, Number of Vacuum Holes Non-Vacuum, Color Maroon.

035 in, Compatible Tool Type Cut-Off Tool, Die Grinder, Primary Material Applicationn Cast Iron, Steel, Tool Steel, Series OBNA2, Wheel Type Type 1, Specification A60-OBNA2, Maximum Operating Speed 40,745 RPM, Reinforced Status Reinforced.

Hook-and-Loop Surface Conditioning Disc, Abrasive Type Non-Woven, Abrasive Material Aluminum Oxide, Backing Material Nylon, Backing Weight X, Coating Coverage Not Applicable, Grade Medium, Grit 80, Overall Diameter 4 1/2 in, Series Surface Prep, Resistance Properties Smear, Number of Vacuum Holes Non-Vacuum, Color Maroon.

Abrasive Cut-Off Wheel, Abrasive Material Aluminum Oxide, Grit 60, Connector Size 1/16 in, Connector Type Unthreaded Hole, Overall Diameter 1 1/2 in, Overall Thickness 0.035 in, Compatible Tool Type Cut-Off Tool, Die Grinder, Primary Material Applicationn Cast Iron, Steel, Tool Steel, Series OBNA2, Wheel Type Type 1, Specification A60-OBNA2, Maximum Operating Speed 40,745 RPM, Reinforced Status Reinforced.