End Mill For Plastics - 2 Flute - Square, 0.0781 (5/64)

0600" Length of Cut x 0.0400" Cutter DIA x 0.0.3250" Reach Carbide Ball End Mill, 3 Flutes, AlTiN Coated.

5.

0.1560" (5/32) Neck Length x 270° Carbide Deburring Undercut End Mill, 12 RH Teeth, 10 LH Teeth.

2500" (1/4) Length of Cut Carbide Square End Mill, 4 Flutes, CVD Diamond.0.0470" (3/64) Cutter DIA x 0.

000 mm Flute Length Carbide HP Drill for Prehardened Steels, 2 Flutes, AlTiN Coated.

0310" (1/32) Cutter DIA x 0.

2340" (15/64) Length of Cut x 0.0781" (5/64) Cutter DIA x 0.9400" Reach Carbide Square Upcut End Mill for Plastic, 2 Flutes.0.

Cable Features: Made in the USA Polyvinyl-chloride (PVC) insulation 90°C MTW – UL & CSA 105°C Voltage rating: Up to 1000 volts UL 10269 VW-1 & moisture resistant ROHS Compliant UL 1232/1284/1338/10269 Approved Ring Terminal Features: tinned copper for corrosion protection Heat Shrink Features: Shrink ratio: Approximately 3 to 1 at +90°C Operational temp.

0781" (5/64) Cutter DIA x 0.2340" (15/64) Length of Cut x 0.9400" Reach Carbide Square Upcut End Mill for Plastic, 2 Flutes.

Cable Features: Made in the USA Polyvinyl-chloride (PVC) insulation 90°C MTW – UL & CSA 105°C Voltage rating: Up to 1000 volts UL 10269 VW-1 & moisture resistant ROHS Compliant UL 1232/1284/1338/10269 Approved Ring Terminal Features: tinned copper for corrosion protection Heat Shrink Features: Shrink ratio: Approximately 3 to 1 at +90°C Operational temp. Our battery cables come with either 5/16″ or 3/8″ ring terminals depending on the battery cable size. range: -55°C to +135°C Dielectric strength: 500 V/mil (197 kV/cm) Volume resistivity: 1014 ohm-cm Tensile strength: 1500 psi (141 kg/cm2) Specifications: AMS-DTL-23053/5, CL 1 and CL 3; UL 224, VW-1; CSA 198, OFT Try a set and see the difference today!. All Spartan Power battery cables come with a Lifetime Crimp Warranty.