6 Ft 6 In Fiberglass Safety Cage

Sq. End Mill,Double End,HSS,7/64 3/16 in.

Square End Mill,Single End,3/8",HSS 3/8 in.

Square End Mill,Single End,3/8",HSS 3/8 in.

Point SV575 H-Coated Premium Cobalt SV Point, High Speed Steel, PVD, 3, 6.4 mm, Measurement System Metric, ANSI Code SV575440.

.Straight Spade Drill Holder 1 in, High Speed Steel, ANSI Code P15202, Overall Length 12 in, Shank Length 3 1/2 in, Cutting Direction Right Hand Drill Dia. 31/32 in, Shank Dia.

Square End Mill,Single End,1/2",Carbide 1/2 in.

5 in, Gear Ratio 50:1, Rotation CW/CCW, Maximum Input Horsepower 1.Speed Reducer, Input Connection Type C-Face, Gear Type Worm, Output Shaft Type Hollow, Maximum Output Speed 35 RPM, Motor Frame Designation 56C/140TC, Worm Center Distance 3 in, Base to Center 3.

Safety Cage Platform Ladder, Ladder Height 6 ft 6 in, Platform Width 20 3/4 in, Platform Depth 18 in, Platform Height 1 ft 10 in, Load Capacity 375 lb, Bottom Width 20 1/2 in, Base Spread 33 3/4 in, Material Fiberglass, Number of Steps 2, Step Depth 4 in, Step Tread Ribbed, Rung/Step Spacing 11 3/4 in, ANSI Type IAA, Includes Includes Tip & Glide Wheels, Standards ANSI, OSHA, Net Weight 55 lb.

5 hp, Maximum Output Torque 2305 in-lb, Overhung Load Capacity 1,350 ft-lb, Mounting Orientation Any Angle, Housing Material Cast Iron, Housing Material Finish Epoxy Coating System.Speed Reducer, Input Connection Type C-Face, Gear Type Worm, Output Shaft Type Hollow, Maximum Output Speed 35 RPM, Motor Frame Designation 56C/140TC, Worm Center Distance 3 in, Base to Center 3.

Safety Cage Platform Ladder, Ladder Height 6 ft 6 in, Platform Width 20 3/4 in, Platform Depth 18 in, Platform Height 1 ft 10 in, Load Capacity 375 lb, Bottom Width 20 1/2 in, Base Spread 33 3/4 in, Material Fiberglass, Number of Steps 2, Step Depth 4 in, Step Tread Ribbed, Rung/Step Spacing 11 3/4 in, ANSI Type IAA, Includes Includes Tip & Glide Wheels, Standards ANSI, OSHA, Net Weight 55 lb.