Natural Frac Ball 4 L

In order to maximize productivity, the creation of multiple fractures is of critical importance. Once the port is opened, the fluid is diverted into the openhole space outside of the completion assembly, casuing the formation to fracture. One popular method for creating fractures is the use of frac ports & sliding sleeves. Most require multiple transverse fractures at specific locations within the horizontal well. At the completion of each fracturing stage, the next larger ball is injected into the well, which open the next sleeve, and so on, until all of the sleeves are opened and multiple fractures are created in the well. The spacing between packaers may be up to several hundred feet. Openhole packers isolate different sections of the horizontal well. In order to activate each sleeve, a properly sized ball is pumped along with a fracturing fluid inside the well. The fracturing ball is free to float off the mandrel with pressure or flow from below the plug. Exploiting tight gas reservoirs requires the ability to fracture wells according to production requirements. The string include frac ports and open hole packers spaced to specifications. Typically, ball sizes are staged in .500" or .250" increments. The packers are actuated by mechanical, hydraulic or chemical mechanisms. It is improtant to understand that this process is not without risk of failure and should only be undertaken after considerable research and consideration. A sliding sleeve is placed between each packer pair and is opened by injecting a ball inside the borehole. Seating of the ball exerts pressure at the end of the sliding sleeve assembly, causing it to slide and open the frac ports. Frac plugs are designed to seal from above the plug only. Each plug uses a plastic fracturing ball that seals on top of the mandrel. This allows immediate flowback of all zones following treatment. Typically, a compleiton string is placed inside the well. The main advantage of this completion technique is the speed of operation which also reduces costs. Each ball is smaller than the opening of all of the previous sleeves, but larger than the sleeve it is intended to open.

Plastics,Plastic Balls

Natural Frac Ball 4 L